We present a compact passively Q-switched mode-locked Nd:LuVO4laser run in a Z-type folded cavity with semiconductor saturable absorber mirror (SESAM). The repetition rates of the passively...
The flywheel energy storage system (FESS) with no-load loss as low as possible is essential owing to its always running in no-load standby state. In this article, cup winding permanent magnet synchronous machine (PMSM) is presented in FESS application in order to eliminate nearly its total no-load loss. First, the principle and structure of the cup winding PMSM is put forward based on the special structure of FESS rotor. Then, in order to accurately and quickly calculate the no-load loss of the PMSM, the no-load magnetic field analytical model of the machine is established to calculate the flux density, flux linkage, back electromotive force and no-load loss accurately, which are verified by the finite-element method. Finally, a 27 MJ/200 kW FESS prototype is manufactured and tested, which verifies the theoretical analysis correctly and proves that the FESS with cup winding PMSM feature the excellent characteristics of low power consumption and high efficiency.
27 December 2023 in IEEE/ASME Transactions on Mechatronics
This article proposes the design of a miniaturized integrated starter–generator (ISG) system applied to a portable mobile power plant. The system utilizes a single-stator and single-rotor axial flux permanent magnet (PM) machine to meet the demands of light weighting and compaction. The stator adopts fractional slot concentrated winding to save space. The rotor is constructed in segmented PMs, resulting in an 83% reduction in eddy current loss. A quasi-3D magnetic equivalent circuit model is proposed for fast and accurate electromagnetic analysis. By optimizing the initial design using a multi-objective genetic algorithm, the power density of the optimized design reaches 1.23 kW/kg. To handle the axial attraction force, a fixing solution with stepped-shape PMs and aluminum alloy rings is introduced. In addition, the external heat of the engine and the anisotropic heat transfer coefficient of silicon steel are fully considered in computational fluid dynamics. The results show the efficient performance of the designed air-cooled structure. Finally, a prototype is manufactured and tested in the modes of starter and generator. The experimental results validate the prediction of the analytical method and the high performance of the ISG machine.
Hypogonadotropic hypogonadism (HH) is common in pituitary stalk interruption (PSI) patients. However, the optimal timing and effective regimen in the management of the pituitary-gonadal axis deficiency is still controversial. This study involved a retrospective review of 38 male patients with HH resulting from PSI. The HH patients were subdivided according to their ages into 2 experiment groups: Group I (adolescents, 14–18 years old, 25 cases) and Group II (young adults, 18–24 years old, 13 cases). To compare the therapeutic response to exogenous gonadotropin, a control analysis was carried out in the experimental groups with age-matched control groups. Before gonadotropin therapy, no significant increases in gonadal hormones were noted in either of the 2 experimental groups. After treatment with human chorionic gonadotropin (hCG) for less than 6 months, the hormone levels of pituitary-gonadal axis significantly increased in group I than in group II. After adding the human menopause gonadotropin (hMG) for 6 months, the gonadal hormone levels of group II were significantly increased. In addition, the Tanner stage and penis lengths in group I were significantly improved. There was no significant adverse impact on BMI and height velocity (HV) after less than one year therapy. A prolonged hypogonadotropic period without treatment may be responsible for testicular dysfunction in HH males caused by PSI. Early supplementary therapy with hCG and hMG is beneficial for the recovery of gonadal hormone and development of secondary sexual characteristics.
12 January 2026 in IEEE Open Journal of the Industrial Electronics Society
Conventionally, flywheel machines are designed by selecting the maximum speed as the rated speed and determining the rated power under Id = 0 control strategy. Such an approach leads to current overloading during constant power operation at low speed and fails to guarantee a sufficient constant power speed range (CPSR). To overcome these limitations, this paper proposes a CPSR-oriented design methodology for surface-mounted permanent magnet synchronous machines (SPMSMs) considering Id = 0 control. Unlike existing studies that rely on single-speed design or multi-point optimization, the proposed method directly plans the permanent magnet (PM) flux linkage and synchronous inductance based on the operating characteristics of flywheel machines to achieve a specified CPSR. Specifically, a comprehensive analytical model is established to quantitatively reveal the influence of PM flux linkage and inductance on CPSR, from which explicit design constraints are derived. Based on these constraints, the optimal PM flux linkage and inductance are determined by considering the power factor and minimizing the average charge/discharge current over the entire CPSR. Furthermore, an efficient and iterative dimensional design procedure is developed to ensure that the machine geometry accurately realizes the selected electromagnetic parameters. The effectiveness of the proposed design strategy is validated through finite element method analysis and experimental testing of a fabricated prototype.