The initial space settings of suitable environments for plants strongly affect the mutual feedback evolution of the river landscape and terrestrial plants. Thus, based on the morphological characteristics of newly-defined systematic out-branching channels in nature, this study performs an effective simulation of the flow of a designed moderately curved bend with a single short branch. The practice-based channel curvatures and branch on–off conditions are controlled in ANSYS FLUENT. The results show that: (1) the core zone of the depth-averaged primary velocity excess is approximately inversely equivalent to the channel migration potential; (2) the existence of the branch can strongly promote the formation of a new core vorticity zone and the conflicting development of the inner-negative and outer-positive vorticity zone after the bifurcation site at the cross-sections; (3) the free-flowing branch can greatly diminish the downstream helical flow strength; overall, the variation tendency of the ratio of helical flow strength to discharge squared is immune to the small range of change in stable inflow; and (4) the downstream channel is a strongly erosive region with the branch outlet closed, judging by the shear stress distribution; otherwise, it is a deposition region. The findings lay the groundwork for harmonious optimization of branch and plant configurations in river-bend systems.
To fully reflect the effect of the flow characteristics, sidewall conditions and sediment concentrations on the bed roughness of sand-bed rivers, this study established a new flow resistance equation by introducing a comprehensive influence coefficient presented via a combination of power-function forms of the relative flow velocity, von Karman constant of sediment-laden flows and the ratio of particle size to viscous sublayer thickness. The comprehensive influence coefficient accordingly acts as a synthesized factor representing the combined effects of the flow intensity, bed material movement, energy consumption condition, and relative friction condition in the near-wall region of sediment-laden flows. Based on the field data from sediment-laden flows under scenarios of both high and low sediment concentrations, the performance of the proposed equation was validated to achieve the best accuracy in the calculation of Manning’s roughness coefficient compared with that of several previously presented flow resistance equations. Furthermore, the proposed flow resistance equation was adopted to quantify the stable channel width of the Lower Yellow River (LYR), i.e., the optimum main channel width for sediment transportation in the typical wandering reach of the LYR. The calculated stable channel width is consistent with the current river training width of the LYR, indicating that the proposed equation has great potential as a theoretical tool that can be used to support the determination of the river training strategy for the LYR.
11 July 2023 in Engineering Applications of Computational Fluid Mechanics
This study presents a novel approach for quantifying the dynamics of monthly hydraulic geometry relationships in the Jingjiang reach of the Yangtze River by integrating leaf area index (LAI) data as an indicator of riparian vegetation. A comprehensive system of ordinary differential equations (ODEs) couples traditional power-law hydraulic geometry equations with LAI, capturing the influence of erosion control on channel morphology. The periodic delayed response theory and automatic differentiation techniques are employed to enhance the modeling framework's capabilities. Calibration and verification demonstrate the models' effectiveness in capturing overall trends in discharge, width, and depth dynamics, outperforming traditional constant-parameter approaches. However, model predictive abilities are limited under extreme climate conditions due to training on normal climate data. Key assumptions, including the periodic delayed response theory's neglect of peak discharges, simplified representation of artificial cut-offs, and reliance on remotely sensed data with limited local validation, introduce uncertainties. The proposed modeling framework shows potential for broader application to other river systems with appropriate adjustments. Future research could incorporate additional environmental factors, integrate models across scales, couple with advanced simulation techniques, and expand stability assessments beyond the riverbed index. By addressing related challenges, this integrated approach lays a foundation for enhancing understanding of river morphodynamics and channel stability.