The alternating-phase fed single-layer slotted waveguide array antenna, which dispenses with the electrical contact between the narrow walls and the slotted plates, has been developed for low cost wireless communication systems, radar systems, etc. The center-feed is introduced to increase antenna bandwidth by having the long line effects associated with the end-feed one. However, the large blocking area at the center of the array aperture causes high first side-lobe levels (about -10 dB). In this paper, the authors propose a cascade of "E- to H-plane cross-junctions" as a new single-layer feed waveguide with reduced blockage. It is in single-layer without inductive posts and is mass producible by die-casting techniques. The antenna characteristics and sidelobe reduction are confirmed by simulation and experiment.
21 July 2021 in IEEE Antennas and Wireless Propagation Letters
A wideband circularly polarized planar antenna with hexagonal apertures arrayed over a plate-laminated waveguide slot array is developed in the 60 GHz band. The 2×2-element subarray functioning as the principal component is precisely and efficiently analyzed by the method of moments using numerical eigenmode expansion. This numerical approach is particularly applied to the regions of both the X-shaped cavity and hexagonal radiating aperture for circular polarization. Moreover, the bandwidths of both axial ratio (AR) and impedance matching in the subarray are significantly widened by applying the genetic algorithm in two steps. The bandwidths for both AR <; 3 dB and VSWR <; 1.5 are improved from 4.8% to 14.5% compared with the previous design. Their mechanisms are investigated in detail as well. A 32×32-element array with a uniform illumination is designed and fabricated by the diffusion bonding of thin copper plates. The wideband antenna performance is verified by the experimental evaluation.
1 December 2008 in IEEE Transactions on Antennas and Propagation
Simple equivalent surface currents perturbed from the physical optics (PO) are proposed, which predict accurate scattering fields without using a special knowledge about the high frequency asymptotic theories such as the geometrical theory of diffraction (GTD). A novel and empirical concept named ldquomodified surface-normal vectorsrdquo is introduced in the classical definition of the PO current, which is defined in a way that the reflection law is satisfied at each point of interest in the integration region. This empirical and geometrical replacement of the surface-normal vectors drastically enhances the accuracy of the PO to a level of the GTD.
1 March 2005 in IEICE Transactions on Communications
Introducing diffusion bonding of laminated thin metal plates to the fabrication of slotted waveguide arrays enlightens the high potential and the feasibility of multi-layer antennas with high-performance. It is a promising process with low cost even for a double-layer antenna, because the number of etching patterns for thin metal plates is only five. In this paper, a double-layer antenna for broadband characteristics is designed in 39GHz band as demonstration. A 20 × 20-element antenna is composed of 2 × 2 sub-arrays by installing a partially-corporate feed circuit in the bottom layer underneath radiating waveguides in the top layer. The five-element sub-arrays in both the feeding and radiating parts are designed first. A new structure for the last slot coupler with shortened termination is also proposed to avoid an extra slot-free region when assembling the neighbor sub-arrays. As the simulation results by HFSS, the maximum gain of 34.55dBi with the antenna efficiency of 85.5% is estimated at 38.5GHz. The test antenna is fabricated by the diffusion bonding of thin copper plates. As the measurement results, a very high aperture efficiency of 83.2% with the directivity of 34.5dBi is realized at the center frequency of 38.75GHz, where the antenna gain of 34.4dBi with the high antenna efficiency of 81.4% is achieved. The bandwidth of 5.0% defined as 1dB down from the maximum gain is achieved.