15 October 2020 in Nuclear Fusion
SOLPS-ITER edge code analysis including drifts shows that optimization of divertor target shaping in a small angle slot (SAS) can strongly influence E× B drift particle fluxes, potentially improving divertor detachment for both toroidal field directions. This is enabled by directing recycling neutrals toward the separatrix from both the common flux region (CFR) and the private flux region (PFR) walls of the slot with a V-shape target in the slot (SAS-V), leading to two separate reinforcing effects, each individually involving positive feed-back: (a) increase of neutral recycling at the PFR wall of the slot due to—and causing—strong radial E× B ion flux from the CFR to the PFR; (b) decrease of E× B loss of ions out of the outer divertor into the inner divertor via the PFR due to reduction of the radial gradient of electron temperature at the outer target caused by the increased particle retention in the outer divertor. This circumvents the general problem for divertor operation with ion B ×∇B toward the X-point: E× B loss of particles from the outer divertor CFR plasma tends to keep it hot and attached. This work identifies a strong interaction between divertor geometry and drifts, a potentially important effect for optimizing advanced divertors for power exhaust in fusion reactors.
16 March 2020 in Nuclear Fusion
1 July 2020 in Fusion Engineering and Design
17 February 2025 in Nuclear Fusion
In this paper, we introduce a novel X-point Slot Closure (XSC) divertor developed for the HL-3 tokamak. The XSC divertor combines the benefits of W-shaped, V-shaped, Small Angle Slot, and Compact Radiative Divertor divertors into a compact design that is compatible with high-elongation and high-triangularity double-null configurations. This design offers three key advantages. First, its compact structure, with the X-point positioned near the dome top, reduces the divertor volume while increasing the overall plasma volume. This configuration effectively traps impurities away from the X-point, thereby reducing the risk of impurity transport into the core plasma and enhancing particle control. Second, the optimized strike-point location on the horizontal target plate, close to the private flux region’s pumping slot, promotes neutral trapping in the XSC divertor, thereby enhancing XSC energy dissipation. Third, the XSC divertor integrates a large-angle V-shaped geometry with the common scrape-off layer plasma, expanding the radiation loss zone. These features position the XSC divertor as a promising solution for addressing the challenges of heat and particle exhaust in future fusion reactors.
7 August 2025 in Plasma Physics and Controlled Fusion
To improve detachment and neutral density/pressure in the long-leg open X-Divertor of Huanliu-3 (HL-3), a Closed V-shaped slot X-Divertor (CVXD) is proposed, which integrates an X-Divertor magnetic configuration with a closed V-shaped slot divertor structure. The physical characteristics of the CVXD are analyzed by SOLPS-ITER, with drifts activated. It was found that the CVXD facilitates divertor detachment at a significantly lower threshold density due to its highly efficient retention of both recycling neutrals and impurities, which enables more efficient pumping as well. In addition, the CVXD effectively mitigates the impact of drifts that pushes particles away from the strike point in the open X-Divertor. Furthermore, a detailed scan of the divertor target particle reflection angle suggested that a higher level of the closure enhances those advantageous features of the CVXD. These findings provide valuable insights for the design and optimization of the future divertor upgrade in HL-3, and highlight the significant potential of the CVXD for application in future fusion reactors.
12 May 2025 in Plasma Physics and Controlled Fusion
A new self-consistent 1D scrape-off layer model has been recently developed in BOUT++ framework, named SD1D, which includes equations for various particle species (e.g. main plasma, neutrals and impurities) and couples open databases like ADAS and AMJUEL. It is able to quickly and effectively simulate divertor detachment experiments. In this work, a typical detachment experiment (shot #6270) on HL-3 with neon seeding is simulated using the SD1D code. It is found that the target electron temperature and the target ion saturation current in the simulations are consistent with experimental results measured by Langmuir probes on the target plate. The variation of radiation intensity in the divertor is qualitatively similar to the measured signal. Following the experimental validations, different upstream densities are set in the simulations to study the impurity distribution under different plasma density conditions. It is found that increasing upstream density can be helpful for the control of the neon radiation front (closer to the target). In this work we also compare two detachment regimes in simulations. Based on the same initial experimental parameters (shot #6270) on HL-3, a scan of upstream density and a scan of neon seeding rate are carried out respectively. It is found that the role of atomic and molecular processes is different in the two detachment regimes. The current density roll-over is ascribed to a drop in the divertor ion source, and the variation of radiation intensity via different excitation channels is associated with the relevant collisional reaction sources.