Cong Yuan

Cong Yuan

Auto-generated profile, based on publicly available information

Cong Yuan

CNRS, LEMTA, Universit de Lorraine, Nancy, France

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 July 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Dongdong ZhaoDongdong Zhao
Dongdong Zhao
XWXipo Wang
Xipo Wang
BTBo Tan
Bo Tan
LXLiangcai Xu
Liangcai Xu
CYCong Yuan
Cong Yuan
YHYigeng Huangfu
Yigeng Huangfu
Precise commutation signal is the prerequisite for the efficient operation of brushless direct current (BLDC) motors. However, the low-pass filter (LPF), non-ideal current, circuit and software retarding can bring about commutation errors which will deteriorate the performance of BLDC motors, for example, resulting in larger current ripple and noise. To eliminate the commutation errors quickly and improve the performance of the motor, a novel compensation method is proposed in this letter. The compensation time is calculated by a counter. And the start-stop signals of the counter are obtained by the virtual neutral voltage. The proposed method requires none voltage or current sensor and have faster compensation speed and higher precision than the traditional compensation method based on integration of virtual neutral voltage. The effectiveness of the proposed method is verified by comparable experiments using an 80W BLDC motor.

8 November 2021 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
CYCong Yuan
Cong Yuan
HBHao Bai
Hao Bai
RMRui Ma
Rui Ma
YHYigeng Huangfu
Yigeng Huangfu
In the electric vehicle dc power system (EVDCPS), a motor or converter can be regarded as a constant power load (CPL) when tightly controlled. Different from the resistive load, CPL may make the EVDCPS unstable. Thus, in addition to less overshoot and shorter setting time, the controller of the converter applied in EVDCPS should maintain the system stable. In this article, the finite-time controller (FTC) is proposed based on exact feedback linearization (EFL) to stabilize the EVDCPS feeding CPL. First, to handle the nonlinearity caused by the CPL, the affine nonlinear model of EVDCPS is transformed into the Brunovsky canonical form by using EFL. Then, the finite-time control is adopted and a PI compensator is designed to eliminate the steady-state error. Under the proposed control algorithm, rigorous proofs indicate that not only the closed system can be large-signal stable, but also the EVDCPS bus voltage can converge the reference in finite time. Furthermore, to reduce the design difficulty of FTC, the backstepping method is adopted to design a backstepping finite-time controller(BFTC). Finally, simulations and experiments of FTC and BFTC are carried out. Results indicate that both FTC and BFTC have large-signal stability, and although the robustness of BFTC is inferior to FTC, the setting time and overshoot are greatly improved compared with the traditional linear feedback controller.

26 August 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
CYCong Yuan
Cong Yuan
Yuhua DuYuhua Du
Yuhua Du
YHYigeng Huangfu
Yigeng Huangfu
CGChao Gong
Chao Gong
Fei GaoFei Gao
Fei Gao
ZLZhipeng Li
Zhipeng Li
The distributed electric propulsion (DEP) system has been favored over the conventional centralized propulsion system in applications of unmanned aerial vehicles (UAV). However, most existing techniques in propulsion system management adopt centralized control approaches, which could not fully utilize the de-centralized features brought out by the DEP system. This paper proposes a novel control approach for UAVs with DEP system (DEP-UAV). The propellers in the DEP system are coordinated in a distributed manner to collectively regulate the UAV’s flight speed and course angle, which are known as powered cruise and yaw controls. To prevent the UAV from stalling out, the powered cruise and yaw controls over each propeller are designed to be sufficiently decoupled. Detailed controller designs and stability analyses are presented. The proposed distributed control algorithm has been fully implemented on hardware devices, and validated on a Controller Hardware-in-the-Loop (C-HIL) testbed for DEP-UAV. The experimental results indicate that without the decoupling between cruise and course controls, the DEP-UAV becomes unstable after 100 seconds and ultimately stalls. However, with the proposed control system in place, a deviation in flight speed is efficiently corrected with minimal overshoot, and the desired course angle adjustment is achieved.

24 November 2023 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
HZHongyu Zhang
Hongyu Zhang
RXRenyou Xie
Renyou Xie
YLYuren Li
Yuren Li
JSJian Song
Jian Song
CYCong Yuan
Cong Yuan
YHYigeng Huangfu
Yigeng Huangfu
The power converter plays a crucial role in energy conversion systems, while advanced control algorithms can help stabilize the bus voltage and match the power demand. In this work, a novel fast terminal sliding mode control is proposed for boost converters to strengthen the disturbance rejection ability. First, a full-order sliding mode manifold is proposed to guarantee the finite-time convergence of system states, and an integral-type switching control law is proposed to deal with large disturbances. Second, the disturbance estimation method is used to identify the system uncertainties and theoretical analysis indicates that it can further enhance the robustness and reduce the chattering. Third, a parameter update mechanism is developed to calculate the model parameters at the current operating point, which contributes to improving the control performance and flexibility to different working conditions. Finally, simulation and experimental tests are conducted to verify the proposed method.

27 July 2023 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
CYCong Yuan
Cong Yuan
YHYigeng Huangfu
Yigeng Huangfu
HBHao Bai
Hao Bai
Shengzhao PangShengzhao Pang
Shengzhao Pang
WSWenzhuo Shi
Wenzhuo Shi
HZHongyu Zhang
Hongyu Zhang
In an unmanned aerial vehicle DC power system (UAV DCPS), the electric motor or point-of-load converter can be considered a constant power load (CPL) with negative impedance characteristics (NIC). This NIC can reduce system damping, causing the system to become underdamped or even unstable. To address this instability caused by NIC, we propose an adaptive finite-time controller (AFTC), which offers large-signal stability and short settling time. To comprehensively analyze the stability of AFTC, we combine the large-signal method and small-signal method. The large-signal stability of AFTC is verified using a Lyapunov function, while the bifurcation method is used to obtain the critical power of CPL, and the eigenvalue method is used to reveal the damping variation. The stability analysis results show that AFTC cannot achieve critical damping without compromising steady-state performance. Therefore, a virtual damper (VD) is introduced to enhance UAV DCPS damping and stability margin. Finally, a down-scaled prototype of UAV DCPS is built to conduct disturbance tests of AFTC. Simulation and experimental results confirm the stability analysis, and VD can push AFTC from underdamped to overdamped, offsetting the effect of NIC.

6 May 2025 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
CYCong Yuan
Cong Yuan
JMJean-Philippe Martin
Jean-Philippe Martin
SPSerge Pierfederici
Serge Pierfederici
EVEmeric Vuillemin
Emeric Vuillemin
MPMatheepot Phattanasak
Matheepot Phattanasak
YHYigeng Huangfu
Yigeng Huangfu
Modularity and unknown transmission line impedances in dc microgrids contribute to increased uncertainty, complicating system-level large-signal stability analysis. Passivity theory is recognized as a promising solution to this challenge, as it simplifies the large-signal stability analysis of dc microgrids by decomposing it into the passivity analysis of individual converters. The interconnection and damping assignment passivity-based control (IDA-PBC) approach, widely adopted based on the port-controlled hamiltonian (PCH) model, ensures that converters exhibit passivity in a closed-loop configuration. However, existing IDA-PBC methods fail to achieve input–output port passivity, preventing system-level large-signal stability due to unmodeled electrical interconnections and subsystem interactions. Additionally, these methods introduce singularities at equilibrium points because the PCH model structure is altered when deriving the unique mathematical expression for the duty cycle. This article proposes an IDA-PBC approach based on reference modification to address these issues. This controller accounts for electrical input variations within the closed-loop PCH model to achieve input-to-output port passivity. Furthermore, the reference for the converters is reconstructed to derive a unique duty cycle expression without altering the closed-loop PCH model, thereby avoiding singularities at equilibrium points. Finally, the system-level large-signal stability of the proposed control is validated through experiments.