Fluid flow characteristics are important to assess reservoir performance. Unfortunately, laboratory techniques are inadequate to know these characteristics, which is why numerical methods were developed. Such methods often use computed tomography (CT) scans as input but this technique is plagued by a resolution versus sample size trade-off. Therefore, a super-resolution method using generative adversarial neural networks (GANs) was used to artificially improve the resolution. Firstly, the influence of resolution on pore network properties and single-phase, unsaturated, and two-phase flow was analysed to verify that pores and pore throats become larger on average and surface area decreases with worsening resolution. These observations are reflected in increasingly overestimated single-phase permeability, less moisture uptake at lower capillary pressures, and high residual oil fraction after waterflooding. Therefore, the super-resolution GANs were developed which take low (12 µm) resolution input and increase the resolution to 4 µm, which is compared to the expected high-resolution output. These results better predicted pore network properties and fluid flow properties despite the overestimation of porosity. Relevant small pores and pore surfaces are better resolved thus providing better estimates of unsaturated and two-phase flow which can be heavily influenced by flow along pore boundaries and through smaller pores. This study presents the second case in which GANs were applied to a super-resolution problem on geological materials, but it is the first one to apply it directly on raw CT images and to determine the actual impact of a super-resolution method on fluid predictions.
Integrated in the peri-Adriatic domain, the Ionian Basin extended along a NW-SE direction during the Late Cretaceous, limited on its sides by the Apulian and the Kruja platforms. The basinal/slope succession was studied in seven outcrops exposed in the Albanian fold-and-thrust belt. Sedimentological investigations, supported by bio- and chronostratigraphy were performed on calcareous Upper Cretaceous hemipelagites, gravity-flow deposits and slumps. The western part of the basin was studied, revealing a strong influence of the Apulianmargin, alternatively shedding sediment basinward, by means of a tectonically controlled edge. The Late Albian to Cenomanian period is characterized by the settling of muddy debrites along themargin. A deep basinal environment characterizes this period which prolongs until the Santonian, with no significant influx of the platform basinward. This sedimentary setting abruptly changed at the end of the Santonian, with an important influx derived from both platforms. Coarsening and thickening upward sequences show a progressive increase in sediment shedding during the Campanian. The Late Campanian-Early Maastrichtian period points out a major change on the resedimentation processes with the settling of several slumped units reworking thick sediment packages. The latter can be traced along the Apulian margin, testifying of instabilities along the edge of Apulia.status: publishe
1 January 2012 in Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles