16 March 2022 in IEEE Robotics and Automation Letters
Developing soft circuits from individual soft logic gates poses a unique challenge: with increasing numbers of logic gates, the design and implementation of circuits lead to inefficiencies due to mathematically unoptimized circuits and wiring mistakes during assembly. It is therefore practically important to introduce design tools that support the development of soft circuits. We developed a web-based graphical user interface, the Soft Compiler , that accepts a user-defined robot behavior as a truth table to generate a mathematically optimized circuit diagram that guides the assembly of a soft fluidic circuit. We describe the design and experimental verification of three soft circuits of increasing complexity, using the Soft Compiler as a design tool and a novel pneumatic glove as an input interface. In one example, we reduce the size of a soft circuit from the original 11 logic gates to 4 logic gates while maintaining circuit functionality. The Soft Compiler is a web-based design tool for fluidic, soft circuits and published under an open-source MIT License.
7 November 2024 in Advanced Intelligent Systems
Fluidic control systems target unique applications where conventional electronics fail. However, current fluidic control systems face challenges in accessible fabrication, reproducibility, and modifiable characteristics such as operating pressure and instability count. Herein, fused deposition‐modeled compliant mechanisms with flexing beams and soft linear actuators for fluid switching and the control of soft robotic systems are introduced. A linear actuator switches a compliant mechanism to cut off airflow through off‐the‐shelf tubing. The modular compliant logic devices can be configured as normally open or normally closed switches, as NOT, AND, and OR gates, and as nonvolatile memory elements. Their use is demonstrated in controlling a fluidic stepper motor, a worm‐like robot, and a fluidic display. These fluidic switches are printable using inexpensive desktop 3D printers, can be reliably reproduced in large quantities, and offer a wide range of modifiable parameters, including scalability, adaptability in operating pressure, and the tunability of instability counts for computational and memory functions.
8 September 2025 in Advanced Robotics Research
Advances in additive manufacturing have streamlined the fabrication of pneumatically actuated soft robotic components, including actuators, logic gates, and robot bodies. However, interconnecting these components with tubing remains a key bottleneck. Manual routing is labor‐intensive, is error‐prone, and limits scalability. We present STREAM, an automated design tool that enables users to assign connection ports and generate tubing routes automatically between components. A modified A* algorithm computes efficient paths, and a modeling algorithm produces a 3D‐printable fluidic circuit board (FCB). We demonstrate the capabilities of STREAM by generating fluidic circuit boards for a soft hexapod robot with 6 logic gates and 72 connections, a variable‐frequency ring oscillator with 6 logic gates and 60 connections, and a full adder with 9 logic gates and 96 connections. This plug‐and‐play tool enables the rapid and reliable creation of complex fluidic circuits by eliminating manual design and assembly and is released as an extension for Blender, the open‐source 3D graphics software. STREAM is broadly applicable to any system involving fluidic channel networks such as lab‐on‐a‐chip devices, microfluidic platforms, or biohybrid systems.