22 April 2022 in Communications in Nonlinear Science and Numerical Simulation
3 July 2023 in Journal of Fluids and Structures
1 July 2025 in Journal of Fluids and Structures
31 July 2023 in Journal of Wind Engineering and Industrial Aerodynamics
1 February 2025 in Physics of Fluids
Focused on optimizing the vortex-induced vibration (VIV) of bridge towers, this study explores the aerodynamic characteristics of tandem rectangular cylinders with varying corner recess sizes through three-dimensional large eddy simulation. The effects of corner recess on aerodynamic forces, mean and fluctuating pressure distributions, flow structures, separation bubbles, and Strouhal numbers are thoroughly analyzed using five numerical simulations. The results reveal that the key factor driving VIV in tandem cylinders is the significant fluctuating lift experienced by the downstream cylinder. Corner recesses lead to smaller separation shear layer scales and earlier flow reattachment, thus reducing the vortex structure scale around the downstream cylinder. However, further increasing the recess size may cause stronger gap and wake vortex intensities, with increased velocity gradients counteracting the positive feedback from the reduction in the vortex scale. Therefore, the study suggests that a moderate corner (the recessed corner ratio is 12% of the cylinder's length and width) provides an optimal flow field around the two cylinders, balancing the dynamic relationship between the enhancement of the velocity gradient and the suppression of vortex structures. This results in a fluctuating lift force characterized by a slight increase at the upstream cylinder and a significant decrease at the downstream cylinder, ultimately minimizing the VIV amplitudes of the tandem cylinders. These findings underscore the importance of corner recess size in achieving aerodynamic stability, offering practical insights for modifying large bridge towers to mitigate wind-induced oscillations.
1 October 2015 in Advances in Mechanical Engineering
With the high fuel prices, the demands for energy saving and green emission of engineering machinery have been increased rapidly. Due to the complex working condition and frequent load changing, the efficiency of the hydraulic excavator is low. The aim of this article is to propose a control strategy for energy recovery system of hydraulic excavator driven by the parallel hybrid system. The mathematical models of the main components and the simulation models of the proposed system and a conventional energy recovery system are built. Then, according to the load characteristic, a control strategy based on the working condition and state of charge of the battery is given. The co-simulation for the hybrid hydraulic excavator system is established. The results show that the proposed energy recovery system and control strategy can not only improve the energy recovery efficiency but also reduce fuel consumption and emission of the power system.