6 January 2025 in IEEE Access
In this communication, dual port, self-decoupled, highly efficient multiple-input- multiple-output (MIMO) antenna for 5G new radio mid-band wireless communication is reported. The proposed MIMO antenna have a total foot print area of 0.82λ0mm x 0.41λ0mm x 0.0057λ0 mm, where λ0 is free space wavelength considering 2.05GHz frequency. In this antenna configuration, single antenna unit is made up of optimized L-shape rectangular patch and ground loaded with defective ground structure (DGS) slot, printed on Rogers 5880 double-sided copper coated substrate with relative permittivity of 2.2. Antenna design is validated using characteristic mode analysis. To achieve antenna diversity, single unit is replicated and converted into two-port MIMO. Further, to show the effectiveness of antenna orientation on inter-element isolation two ports are placed in 0°, 90° and 180° orientation. The proposed structure provides 98.8% average radiation efficiency along with 4.1dBi peak gain in the direction of broadside radiation over the operating frequency. Mutual coupling between the antenna elements is discussed using surface current distribution and surface wave propagation. The maximum isolation is -41.9dB between ports, 0.0001 envelope coefficient correlation, 9.99dB diversity gain, <0.4bits/s/Hz channel capacity loss, less than -1dB multiplexing efficiency, -31.2dB TARC and zero mean effective gain (MEG1/MEG2) ratio are some of the salient features of the proposed design. In order to verify the simulated results, the prototype is fabricated and the measurements are carried out using vector network analyzer and anechoic chamber. Good coherence between experimental and simulation results were found.
31 July 2025 in Arabian Journal for Science and Engineering
1 August 2026 in Engineering Research Express
This paper presents a compact 8 × 8 mm 2 four-element Multiple Input Multiple Output antenna for 5 G frequency range (FR-2) operating over 23.68–31.88 GHz, derived from a mathematically shaped microstrip radiator on Rogers RT5880 with a partial-ground topology. The 4 × 4 × 0.25 mm 3 (0.36 λ 0 × 0.36 λ 0 × 0.023 λ 0 ) single element is tiled into an 8 × 8 × 0.25 mm 3 (0.72λ 0 × 0.72λ 0 × 0.023λ 0 ) array arranged orthogonally to achieve inherent isolation without external decouplers. Parametric optimization of ground height/width and feed width yields a fractional bandwidth (BW) of 27.2% with deep minima near 27.1 GHz; inter-element coupling (isolation) stays below −23 dB across the entire operating band. Diversity metrics computed from far-field shows envelope correlation coefficient less than 0.002 and diversity gain >9.99 dB across operating BW, while channel capacity loss remains well below typical limits. System-level assessments indicate mean effective gain tightly clustered near −3 dB for all ports, and total active reflection coefficient (TARC) exhibits −32 dB notch near 27–28 GHz with TARC < −10 dB over a practical span. The simulated and experimental results demonstrate wideband matching, low correlation, and efficient active power acceptance in a compact footprint, suitable for dense 5 G devices in the 28 GHz band.