Accurately quantifying vertical sediment transport rates in large seaward rivers is vital for estimating basin-scale water and sediment fluxes and assessing riverbed evolution. Traditional multi-point velocity and suspended sediment concentration (SSC) measurements are costly and slow, hindering long-term online monitoring. Bidirectional flows in tidal reaches further exacerbate this challenge. We propose a physics-constrained support vector machine (SVM) inversion method to estimate vertical sediment transport rates from single-point measurements. Constrained by modified logarithmic velocity and Rouse suspended sediment concentration profiles, it quantitatively relates single-point hydraulic variables to key parameters governing vertical distributions. Lower Yangtze River tidal reach field data validate the hybrid model’s successful reconstruction of vertical distributions. It accurately captures transient sediment responses across maximum flood and ebb. Inverted transport rates match measurements closely (RMSE = 0.085, NSE = 0.969, PBIAS = 2.50%) and exhibit strong cross-site generalization. Sensitivity analysis identifies 0.4 times the water depth above the riverbed as the optimal single-point sensor position. Although currently validated only in the lower Yangtze River, this low-cost, reliable method supports local basin management, flood control, and disaster mitigation by enabling continuous sediment flux monitoring. However, applying it to other river or estuarine systems may require recalibration or retraining to adapt to different local conditions.
The Ma’anshan section of the lower Yangtze River features a complex multi-anabranching system, where the river divides into several branches around mid-channel sandbars, with distinct point bars alternately developing along both banks. Within this morphologically active system, Zhengpu Harbor suffered severe operational disruptions by accelerated siltation at its approach channel, primarily due to its vulnerable location downstream of the expanding Niutun River point-bar on the left bank. To systematically diagnose the mechanisms of siltation, this study integrates multi-method investigations: decadal-scale morphodynamic analysis using long-term bathymetric surveys, numerical modeling to quantify engineering impacts on flow dynamics, and multiple linear regression analysis for the contributions of key influencing factors. The result identifies three primary drivers of siltation, collectively responsible for 70% of the sediment accumulation, including the rightward shift of the thalweg in the Ma’anshan left branch, reduced flow diversion of the left Branch of Central bar, and the expansion of the Niutun River point bar. River engineering structures, such as bridges, contribute approximately 12%, while changes in upstream flow-sediment supply account for approximately 18%. To mitigate siltation at Zhengpu Harbor’s approach channel, this study proposes targeted engineering interventions to enhance local hydrodynamic conditions. The spur dikes were designed to enhance the morphological stabilization of the Central bar head to regulate flow distribution. A diversion channel could also be excavated at the tail of the Niutun River shoal, and emergency dredging was recommended at the harbor front. Numerical modeling indicates that these measures will increase flow velocity by over 0.1 m/s at the harbor front, mitigating the siltation situation. The study concludes that the proposed engineering measures can reduce annual siltation by approximately 30% under normal-year hydrological conditions, demonstrating their feasibility in mitigating siltation trends in multi-anabranching river systems. This research provides a reference for addressing siltation issues in harbors within complex anabranching river systems.