10 March 2026 in SSRN Electronic Journal
Thin-walled circular tubes are widely employed in lightweight structural applications due to their high strength-to-weight ratio and manufacturability. However, under severe bending loads, these members are susceptible to localized collapse governed by ovalization and plastic hinge formation. While this response can be exploited as an effective energy dissipation mechanism for crashworthiness applications, it is often limited by low peak bending capacity. This study investigates the enhancement of bending collapse performance through localized sleeve-type reinforcements manufactured from structural steel and joined via laser welding. A finite element model, validated against experimental three-point bending tests, is developed to quantify the influence of reinforcement geometry on peak bending moment and energy absorption. Results demonstrate substantial improvements, with increases of up to 93.24% in peak bending moment and 50.44% in absorbed energy, achieved with a modest 27.27% mass penalty, outperforming equivalent gains obtained through uniform tube thickening. To support design optimization, a metamodel-based framework is proposed to determine optimal reinforcement length as a function of tube diameter, wall thickness, and reinforcement angle, maximizing peak moment (M max) and specific energy absorption (SEA). The proposed reinforcement strategy provides a manufacturable and weight-efficient pathway for improving the crashworthiness of tubular structures, offering practical benefits for lightweight and safety-critical engineering applications.
1 September 2026 in International Journal of Lightweight Materials and Manufacture