Beijing Key Laboratory of Micro-Nano Energy and Sensor, Center for High-Entropy Energy and Systems, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing 101400, P. R. China
Auto-generated profile, based on publicly available information
Mengfan Li
Beijing Key Laboratory of Micro-Nano Energy and Sensor, Center for High-Entropy Energy and Systems, Beijing Institute of Nanoenergy and Nanosystems, Chinese Academy of Sciences, Beijing 101400, P. R. China
Triboelectric–electromagnetic hybrid nanogenerators (TE-HNGs) are promising for efficient energy harvesting, particularly from high-energy-density water waves. However, existing TE-HNGs often suffer from mechanical combinations and lack comprehensive energy optimization strategies, resulting in a suboptimal overall effect where 1 + 1 ≤ 2. Herein, a highly coupled energy self-managed power system (ESPS) is proposed based on our meticulously designed multilayer magnetic suspension hybrid nanogenerator (MS-HNG) with triboelectric and electromagnetic units. Due to voltage phase coherence between the generators, the magnetic suspension electromagnetic generator (MS-EMG) serves as the gate drive source for metal oxide semiconductor field-effect transistors, enabling the instantaneous release of energy from the magnetic suspension triboelectric nanogenerator (MS-TENG) and thereby maximizing energy output within each cycle. The ESPS achieves a peak power of 261.3 mW, a significant improvement over 75.5 mW from the MS-HNG alone, illustrating a synergistic effect where 1 + 1 > 2. Additionally, the ESPS achieves a current of 45 mA (a 7500% increase) and a power density of 631 W m−3 (a 346% increase). In water wave environments, this system can power 32 bulbs of 3 W each and perform water quality monitoring. This work represents a new breakthrough in the structural and circuit coupling of TE-HNGs, marking a milestone towards commercialization.
Systematically expounding the design of a hybrid triboelectric nanogenerator (H-TENG) for collecting wind and water flow energy and analyzing its electrical performance in response to different parameters.
Rolling-structured triboelectric nanogenerators (RS-TENGs) hold great potential for marine wave energy harvesting owing to their structural simplicity, low-threshold driving capability, and suitability for mass production. To overcome charge density limitations in conventional binary interfaces, this work proposes a triboelectric charge-enhanced RS-TENG (TCE-TENG) by introducing a polyoxymethylene (POM) sidewall friction layer to construct a ternary triboelectric interface. Benefiting from the enhanced triboelectric polarity of POM, this design significantly boosts surface charge density, achieving an average volumetric power density of 21.3 W m−3 in controlled tests. To address the impedance mismatch between the TENG's high internal impedance and practical electronic loads, a compact power management circuit (PMC) is developed, dramatically improving capacitor charging efficiency. Under water wave conditions, the TCE-TENG maintains a robust average power density of 8.1 W m−3. When integrated with the PMC, it successfully powers an array of ten thermo-hygrometers; furthermore, it sustains a wireless water level alarm system in intermittent operation mode. This research offers a scalable technological foundation for advancing triboelectric nanogenerators in wave energy harvesting and self-powered marine sensing.