A comparative study was conducted on the absorption of carbon dioxide (CO2) using ionic liquids (ILs) based on imidazole derivatives as cations and amino acids as anions ([BMI][AA] and [OMI][AA]). The synthesized ILs were characterized using Fourier Transform Infrared Spectroscopy, and absorption studies were conducted using a pressurized batch system under stable pressure and temperature conditions. Amino acids demonstrated an enhancement in the absorption of this acidic gas when compared to monoethanolamine, which is the most commonly used commercial absorbent compound.
This study presents the development of an irregular green block for interior non-structural partition applications through an integrated framework of design and continuous improvement tools. The methodology combined Quality Function Deployment (QFD), Poka-Yoke, Kaizen, and a suggestion-based feedback mechanism. In the first stage, customer requirements were identified through 388 valid surveys. Mechanical resistance, environmental value, affordability, and practical confidence were identified as the main design priorities. These requirements were translated into technical criteria through the House of Quality. Experimental validation included 21 formulations prepared with polylactic acid (PLA) and sugarcane bagasse. Processing temperature was maintained at 140 °C and specimen mass at 10 g. Bagasse concentration varied from 0% to 20%. Mechanical performance was evaluated through tensile testing of bone-shaped specimens, while structural characterization was carried out using FT-IR. The results showed a progressive reduction in tensile resistance as bagasse concentration increased. Pure PLA presented the highest resistance value at 4.20 MPa, while the 80% PLA–20% bagasse formulation reached 0.70 MPa. ANOVA confirmed statistically significant differences among formulations. The developed block was therefore reoriented toward interior non-structural partition applications.
The present work presents the application of the Quality Function Deployment tool, “QFD” for its acronym in English, used to translate the needs of a consumer into technical specifications that are responsible for meeting customer expectations. In this case, the analysis is oriented toward the future conceptual manufacture of disposable biodegradable cups made mainly with polylactic acid (PLA). The preliminary stage of the QFD consisted of developing a series of survey questions aimed at a representative sample of university students, where the key requirements that a biodegradable cup must have according to customers were determined and their hierarchy of importance was established. Thus, based on consumer requests, technical specifications were proposed to satisfy their needs; specifically, the material composition, molding conditions, wall thickness, container geometry, surface finish, color and cost were defined. The analysis showed that biodegradability constitutes the attribute most valued by the respondents, while the molding process and cup thickness represent the technical factors with the greatest influence. The QFD results showed correlations between customer requirements and technical specifications, resulting in quantitative prioritization oriented towards future experimental stages. The application of the QFD methodology led to a search of scientific literature.