Computer vision systems are an essential part in industrial automation tasks such as: identification, selection, measurement, defect detection and quality control in parts and components. There are smart cameras used to perform tasks, however, their high acquisition and maintenance cost is restrictive. In this work, a novel low-cost artificial vision system is proposed for classifying objects in real time, using the Raspberry Pi 3B + embedded system, a Web camera and the Open CV artificial vision library. The suggested technique comprises the training of a supervised classification system of the Haar Cascade type, with image banks of the object to be recognized, subsequently generating a predictive model which is put to the test with real-time detection, as well as the calculation for the prediction error. This seeks to build a powerful vision system, affordable and also developed using free software.
30 June 2022 in Revista de Tecnologías en procesos Industriales
This project shows the integration of a didactic prototype of a robotic manufacturing cell for the programming of welding trajectories in a chassis. The purpose of this project is to integrate the robotic cell through the interaction of the controller of an industrial robot, a programmable logic controller (PLC) and a power transmission system for the positioning of a chassis for didactic purposes for students studying engineering in the area of Industrial Automation. To carry out the project, a scale chassis for a tractor and its support base was first manufactured, then the control of a stepper motor was carried out through a SIMATIC S7-1200 CPU 1214C PLC and a microstep driver module. The programming software COSIMIR from FESTO was also used to program the welding trajectories in a Mitsubishi RV-2AJ robot with 5 degrees of freedom that interacts with the PLC through input and output digital modules. Finally, it was possible to obtain a functional prototype of a robotic manufacturing cell that can be used for teaching robot trajectory programming and that is closely related to industrial machines.
The increase of gases in the ozone layer is an important issue nowadays in the Universities of Higher Education in Mexico; there is a great interest in contributing to the reduction of the carbon footprint, therefore, a study was carried out to calculate the footprint generated by the students of the Polytechnic University of Guanajuato through the use of software. The participants were 27 students of the Automotive Engineering degree of the sixth semester, which during this period kept a record of the consumption of PET bottles in their various presentations. The main findings were that the total CO2 they produce is 131.7 Kg, which would be equivalent to 0.176 barrels of oil and 1.19 m3 of space saved in landfills. Now, taking into consideration the entire student population (3,899), the calculation was projected annually and estimating the same consumption patterns, would save 76.3 barrels of oil against 515.55 m3 of space in sanitary landfills.
The increase in autonomous driving technologies, as well as biometrics using biosignals from vehicle drivers, provide information that can be used for the development of personalized biosecurity and driving systems for each user. Currently, studies are being carried out on the extraction and classification of driver characteristics with great precision, to generate intelligent systems that are auxiliary and that help to safeguard the integrity of people while driving vehicles. This work presents the recognition of 5 hand gestures to control the driving actions of an electric vehicle using the EMG signals from the MYOTM bracelet, these signals have also been used to detect users and thus allow the use only of the people registered in the application. To perform gesture recognition, a convolutional neural network was trained and implemented for the classification of actions. Finally, a cross-validation was carried out to validate the reliability of the proposed system, obtaining 99.2% accuracy during the classification.
31 December 2024 in Revista de Energías Renovables
In Mexico, there is a delay in the mobility process of people with motor disabilities. At the same time, in our country there are nearly 3 million people with motor disabilities according to what INEGI reports in its 2020 census. Therefore, a virtual prototype is being proposed as a result of the first stage of its own methodology for the design of a hybrid tricycle to transport people with motor disabilities, which offers versatility in terms of transport configurations in the facilities of the Polytechnic University of Guanajuato (UPG). In a second stage, it is proposed to build a scale prototype using additive manufacturing to identify areas of opportunity before building the final prototype and carrying out its real physical tests in order to obtain sufficient data to implement a commercial model that can be reproduced. reliable way.
Currently, electric and hybrid vehicles have enjoyed greater consumer acceptance, as reflected in global sales figures from the International Energy Agency [IEA]. Therefore, this work proposes the conceptual design of a prototype of a battery pack with BYD Blade prismatic cells and A123ANR26650 cylindrical battery pack through Battery Builder MATLAB tools and CAD software for a BYD Dolphin 2024 EV vehicle. Applying these tools, virtual prototypes of a prismatic battery pack and a cylindrical battery pack were modeled, which achieve the energy storage requirements indicated in the vehicle's technical data sheet. A comparison is also made between the two packs based on the number of cells required, weight, and dimensions of the battery tray.