16 June 2021 in IEEE Transactions on Industrial Electronics
It is well known that permanent magnet Vernier machine (PMVM) has multiple flux field harmonics, which can produce stable torque. However, some flux field harmonics would create torque that undermines the total torque output. Such as the 6 slots 26 poles split-tooth PMVM here, of which modulated flux field outputs torque while fundamental flux field undermines torque output. In this article, a 26 pole PMVM with coding-shaped tooth is proposed. The coding-shaped tooth can introduce permeance harmonics with specific phase and amplitude, thus modulating flux fields that all output torque. Air-gap permeance harmonics of the proposed and the regular split-tooth PMVM are obtained via FEA. Based on MMF-permeance model, flux fields of two machines and their contributions to average torque are investigated, proving that the proposed machine has multiple flux fields that all output torque. Moreover, by optimizing geometric parameters of coding-shaped tooth, the proposed machine could obtain largest average torque and smallest torque ripple simultaneously. Electromagnetic performances of the optimized machines are studied comparatively in semianalytical way and FEA. It is proved that with same overall size, PM usage, and copper loss, the proposed machine could achieve 30% larger torque density, 86% smaller cogging torque, and 62% lower torque ripple than its counterpart. Finally, a 16-N·m (rated) prototype is built and tested.
4 January 2023 in IEEE Transactions on Industrial Electronics
Vernier permanent magnet machines (VPMM) have attracted extensive interest owing to high torque density. However, VPMM with larger rotor pole pair Pr than stator teeth number Zs has weak torque capability due to the opposite phase of fundamental back electromotive force E 1 induced by the fundamental and modulated flux density, i.e., BPr and BPa . Thus, the pole ratio (PR, defined as the ratio of rotor pole pair Pr to winding pole pair Pa ) of VPMM with Pr > Zs is labeled as “bad,”, and has long been abandoned. This article puts forward two novel design tools, i.e., unequal element coil (UEC) and stator teeth unit (STU), via which the torque-improvement method of VPMM with “bad” PR is proposed. First, constructing the winding via UEC, in which both BPr and BPa induce E 1 of the same phase, meanwhile the total E 1 is maximized. Second, designing the stator teeth structure via STU so that multiple flux density harmonics are exploited and E 1 can be further enhanced. A VPMM with Pr = 10 and PR = 10 is designed by the proposed method. The FEA and experimental results prove that at current density 7.5 A/mm 2 , the torque density of the proposed VPMM is improved to 18.3 N·m/L while the regular counterpart is only 13 N·m/L.
6 June 2022 in IEEE Transactions on Transportation Electrification
The vernier permanent magnet machines (VPMMs) have attracted extensive research interest due to inherent high torque density, which is brought by the “magnetic gearing effect” based on slot-toothed air gap. Regularly, the air-gap topology of VPMM is initially determined and produces the certain composition of magnetic field harmonics, which decides the torque capability. Output torque is improved in a limited way via repeatedly optimizing the air-gap structure parameters. Herein, a quantitative air-gap construction method is proposed to construct the air-gap topology that could produce the magnetic field harmonics of which the total torque generation is maximum. With air-gap permeance as the bridge between torque and magnetic field harmonics, the proposed method quantitatively designs the optimal amplitude of individual radial air-gap permeance unit. Then, the length of the corresponding air-gap unit is obtained, which are assembled to form the final air-gap topology. The proposed method is applied on a surface-mounted VPMM (SVPMM) to illustrate. In theory, the torque density of the proposed machine could achieve 32 Nm/L under natural cooling when electric loading is 250 A/cm. Compared to the open-slot counterpart under the same conditions, the rated torque of the proposed machine is theoretically 68% larger, and is still 32% larger despite the saturation in steel. Finally, a prototype is fabricated, and the test results verify the feasibility of the proposed method.
9 June 2023 in IEEE Transactions on Transportation Electrification
Transportation electrification has greatly altered the way people live, leading to the light-duty vehicles such as electric bicycle, wheelchair and scooter, which brings great convenience to daily travel. The ability of direct drive and large torque for traction motor is the key to fulfill the faster, safer and cheaper vehicles. As for the regular permanent magnet (PM) motor, the improvement of torque density is challenging due to the limited magnetic field energy utilization. In this paper, a high-torque-density PM traction motor is proposed which features the open-slot stator, and spoke-type magnet rotor with dual-axial-flux bridges. The proposed motor obtains high torque density owing to two benefits. On one hand, the open-slot stator creates additional magnetic field harmonic besides fundamental one in regular PM motor. Both field harmonics could engage in electromechanical energy conversion and output torque. On the other hand, the unique design of dual-axial-flux bridges could effectively amplify two field harmonics, facilitating higher magnet field energy utilization within a limited usage of magnet. The analytical and simulation results show that torque density of the proposed motor can reach 30.5Nm/L at 200A/cm electric loading, which almost triples that of the regular PM counterpart. Hence, it is of great significance for the development and promotion of light-duty vehicles and has multiple application prospects.
17 December 2025 in IEEE Transactions on Transportation Electrification
Low vibration is a critical performance metric for high-speed electrical machines, particularly in applications requiring stringent acoustic compliance. For integer-slot permanent magnet (PM) synchronous machines, the main sources of vibration under different speeds are the radial electromagnetic force harmonics of different frequencies, which are related to the rotor pole pairs and stator slots. In this article, a novel vibration suppression method concerning a vibration-reducing winding is proposed. The vibration-reducing winding injected with specific harmonic current can produce flux density of specific spatial–temporal properties which interact with that from the armature winding and PMs, producing the radial force which could offset the primary vibration-induced radial force harmonics. Compared with the conventional harmonic current injection method, the proposed method effectively suppresses the primary radial electromagnetic force of different frequencies over a wide speed range with small electric load. Finally, the proposed method is verified to reduce the vibration acceleration by over 60% via both FEA and experimental methods, while the electric load of the vibration-reducing winding is only 5.6% that of the armature winding.
7 August 2023 in IEEE Transactions on Transportation Electrification
In recent years, consequent pole vernier permanent magnet machine (CPVPMM) has been found higher torque capability and less magnet usage compared to the surface-mounted counterpart i.e. SVPMM, thus attracting extensive interests. Meanwhile, the theoretical basis of CPVPMM is not well established because of its unconventional PM arrangement. Due to the simplified dual-salient permeance model widely adopted in CPVPMM, the misinterpretation in time-space distribution of magnetizing magnetomotive force (MMF) and air-gap permeance leads to deviated sizing equations, which hinders the development of CPVPMM. This paper proposes a new analytical model, i.e. the magnetic potential difference between stator core and rotor surface, based on the modified dual-salient permeance and the resultant improved MMF. Via the proposed model, a new analytical derivation featuring precise calculation of air-gap flux density is obtained to clarify the working mechanism of CPVPMM and give helpful design hints to fulfill high torque density. For the first time, it is identified the phenomenon of potential difference oscillation and additional harmonic exist in both CPVPMM and SVPMM. The influence of potential difference oscillation on working flux density is quantitatively analyzed, which reveals the operation principle of CPVPMM, and also unveils the underlying torque improvement mechanism over SVPMM, which gives new insight on enhancing torque of vernier machines. Finally, the analytical and FEA results are validated by experiments.