Thermal sprayed aluminum coatings are widely scalable to corrosion protection of the offshore steel structure. However, the corrosion rate of the Al coating increases considerably due to the severe marine environment. It has remained a challenge to improve the corrosion resistance and protective ability of Al coatings. The superhydrophobic surface provides a potential way to improve the corrosion resistance of metal materials. Hence, the development of superhydrophobic Al coatings with superior corrosion resistance is of great interest. In this work, the feasibility of the preparation of superhydrophobic Al coatings on a steel substrate was explored. First, Al coatings were prepared onto the steel substrate by the arc-spraying process, followed by ultrasonic etching with 0.1 M NaOH solution, and afterward passivated using 1% fluorosilanes. The effects of the etching time on morphology, contact angle, and corrosion resistance of the Al coatings were evaluated. The schematic model of the fluorosilane passivation process on the Al coating surface was provided. The micro/nanoscale surface structure of the low-surface-energy fluorosilanes promotes the wetting angle of 153.4° and a rolling angle to 6.6°, denoting the superhydrophobic properties. The superhydrophobic Al coating surface displays excellent self-cleaning performance due to its weak adhesion to water droplets. The corrosion current density of the superhydrophobic Al coating (1.36 × 10–8 A cm–2) is 2 orders of magnitude lower than that of the as-sprayed Al coating (1.18 × 10–6 A cm–2). Similarly, the charge-transfer resistance is found to be 12 times larger for the superhydrophobic Al coating and the corresponding corrosion inhibition efficiency reaches 98.9%. The superhydrophobic Al coating displays superior corrosion resistance and promising applications in a marine corrosion environment.
In this work, Fe64Nb3B17Si6Cr6Ni4 and Fe60Nb3B17Si6Cr6Ni4Mo4 (at. %) coatings were prepared with a high-velocity air fuel spraying method, and the effects of minor Mo addition on the microstructure, glass formation, and corrosion resistance of the coating were studied. It was found that the Mo addition improves the glass-forming ability of the alloy and a fully amorphous structure with a higher compactness was obtained in the Mo-containing coating. The thermal stability of the coating is enhanced by Mo addition and the onset crystallization temperature was increased by 20 K. In addition, the Mo-containing amorphous coating exhibited higher corrosion resistance than the Mo-free coating. The superior corrosion resistance can be attributed to the increased proportion of protective, stable Cr, Nb, and Mo oxides in the passive film and fewer defects of the Mo-containing coating.