Aircraft cable have the special status in aviation domain, with the improvement of aircraft performance requirements, the amount of the single wire is also increasing gradually. Demanding of its performance and maintaining is increasingly day by day. An aircraft cable fault diagnosis and location system based on Phase Detection Frequency Domain Reflectometry (PDFDR) is presented in this paper, which is used to diagnose and locate the special aircraft cable faults, such as intermittent fault, continuous fault and cross-connect fault. With the threshold denoising method on Hilbert Huang Transform, the studied approach is developed to detect and locate aircraft cable “hard defects” (i.e. opens and shorts) based on Phase Detection Frequency Domain Reflectometry (PDFDR). By analyses the differences of amplitude and phase in superimposed signal which from the incident signal and the reflected signal on defects, the shortage of Phase-Detection Frequency Domain Reflectometry (PDFDR) simply using in locating aircraft cable defects is solved. Utilizing the strong calculating capability and the abundant function library of MATLAB, the signal processing turn to be easily realized, moreover LabVIEW help the system to be more reliable and updated easily
Additive manufacturing (AM) produces microstructures the behavior of which under extreme conditions remains largely unexplored in chemically complex alloys. Here, we investigate the high‐pressure and high‐temperature response of an AM AlCrFe 2 Ni 2 alloy fabricated at two scan speeds: a high scan speed (900 mm/min), yielding a BCC/B2‐dominated microstructure, and a low scan speed (64 mm/min), producing a lamellar FCC + BCC/B2 eutectic. In situ synchrotron X‐ray diffraction reveals that both alloys undergo a pressure‐induced BCC/B2 → HCP transformation at ~13–19 GPa, demonstrating that the transition is governed by the intrinsic instability of the BCC/B2 lattice and is largely independent of phase fraction and microstructural morphology. Upon laser heating at high pressure, the HCP phase is not retained; instead, both alloys recover a cubic assemblage containing BCC/B2 together with more pronounced FCC reflections. The recovery of cubic phases occurs at a lower temperature in the low‐scan‐speed condition, consistent with its higher interphase‐boundary density and shorter diffusion pathways. The convergence of distinct AM microstructures toward a common high‐temperature cubic state establishes AM AlCrFe 2 Ni 2 as a model platform for disentangling lattice instability, hierarchical chemical partitioning, and diffusion‐driven phase selection in chemically complex alloys under extreme conditions.