Micro-structured pressure sensors with broad pressure sensing range, high sensitivity and rapid response speeds are highly desired for epidermal electronic skin. The widely used methods to fabricate micro-structured pressure sensors are lithography and biomaterial-replicating, which are either complex in preparation procedure or uncontrollable in micro-structure morphology. In this work, laser micro-structured wearable pressure sensors with high-performance are developed for epidermal electronic skin. Laser micro-engineering, with scalability, high-efficiency, and controllability, is employed to prepare a series of micro-structures on elastomers for modulating and enhancing the sensitivity of the sensors. The device with micro-domes owns a sensitivity of −1.82 kPa −1 , which is approximately 17 times better than the one based on long micro-ridges. Due to the reduced viscous properties of the elastomers by laser micro-engineering, the sensor based on micro-domes demonstrates rapid response/relaxation speeds of 0.036 and 0.052 s, respectively, and a detection limit of 0.001 kPa. Additionally, the device has a good durability (6,000 cycles) with a repeatability deviation of 1.44%, confirming its stability. Combined with near field communication technology, the sensor has been investigated as epidermal electronic skin for health monitoring.
Spatially arranged polymer brushes provide the essential capability of precisely regulating the surface physicochemical and functional properties of various substrates. A novel and flexible polymer brush patterning methodology, which is based on employing a digital mirror device (DMD)-based light modulation technique to spatiotemporally regulate a surface-initiated photoinduced atom transfer radical polymerization (photo-ATRP) process, is presented. Various characterization techniques confirm that the spatially and/or temporally controlled brush formation results in complex PEG-derived brush patterns in accordance with a customized digital image design. A series of step-and-exposure strategies, including in situ multiple exposure, dynamic multiple exposure and dynamic sequential exposure, are developed to implement spatiotemporal regulation of the photo-ATRP process, leading to complex patterned and gradient brushes featuring binary functionalities, pyramid nanostructures and radial directional chemical gradients. Moreover, tunable and radial directional concentration gradients of various biomacromolecules (e.g., streptavidin) are obtained through preparation of height gradients of azido-functionalized brushes and subsequent orthogonal chemical activation aimed at specific protein immobilization. Finally, a unidirectional concentration gradient of fibronectin, surrounded by non-fouling PEG brushes, is fabricated and applied for human umbilical vein endothelial cell (HUVEC) adhesion experiments, whose preliminary results indicate gradient-dependent cell adhesion behavior in response to the concentration gradient of fibronectin. The presented fabrication technique could be integrated with microfluidic devices for sensors and bio-reactors, paving the way for novel approaches for lab-on-a-chip technologies.