3 August 2023 in IEEE Transactions on Transportation Electrification
The demand for safer and more reliable drive systems for renewable energy and vehicle electrification continues to increase, requiring effective ways for the drive motors to determine the safety and reliability of the vehicle powertrains. In recent years, the problem of bearing electrical-erosion damage caused by bearing currents—which results in drive motor faults—has become increasingly serious, limiting the life of motors. Consequently, research on bearing currents and electrical-erosion damage has become key for the development of electric vehicle motor drive systems. This review explains the generation and conduction mechanism of bearing electrical-erosion damage based on the formation mechanism and changing law of bearing currents. Additionally, actual electrical-erosion suppression measures are summarized from two perspectives: hardware and software. Finally, crucial technical deficiencies in the current research are highlighted and potential future research areas are proposed.
18 January 2021 in IEEE Access
The existing energy management strategies for four-wheel-drive electric vehicles only take into account the vehicle energy consumption under static adhesion constraints. However, the front and rear axle loads transfer under dynamic conditions lead to the variations of vehicle adhesion characteristics, which results in the changes of vehicle energy consumptions. In this paper, a multi-objective optimal torque distribution strategy is proposed, taking into account the front and rear axle load transfer and the variations of adhesion characteristics. The advantages of the proposed strategy are verified through simulation studies in terms of vehicle energy consumption and wheel slip ratio, in comparison with the average torque distribution strategy and the optimal torque distribution strategy based on Sequential Quadratic Programming Algorithm. The simulation results show that the economy performance of the proposed strategy is superior to those of the competing methods. Furthermore, the proposed strategy provides good power performance and eliminates excessive wheel slip, which in turn ensures vehicle longitudinal stability and avoids energy loss resulting from frequent ASR interventions.