Based on the nonequilibrium Green’s function (NEGF) ballistic transport simulation, an optimized homojunction carbon nanotube (CNT) gate-all-around tunnel field effect transistor (GAA TFET) is proposed in this study. This TFET enhances the ON-state current and suppresses the ambipolarity extensively. By changing the channel diameter, gate length, and insulator thickness along with different values of doping levels and dielectrics of the source/channel/drain regions, a subthreshold swing $({SS})$ equal to ${11} ~\text {mV}/\text {dec}$ with an ON/OFF ratio of 10 8 is obtained at ${V}_{G}={V}_{D}={0.4}$ V. Source (drain) underlap/overlap with the gate is also considered in reaching an optimum result. Such advantages can be followed on other 1-D TFET devices and are explained in detail on the energy band diagram of the device.
Choosing a suitable doping level of channel relevant to channel diameter is considered for determining the carbon nanotube field effect transistors’ performance which seem to be the best substitute of current transistor technology. For low diameter values of channel, the ratio of on/off current declines by increasing the doping level. But for higher diameter values, there is an optimum point of doping level in obtaining the highest on/off current ratio. For further verification, the variations of performance are justified by electron distribution function’s changes on energy band diagram of these devices. The results are compared at two different gate fields.
6 April 2016 in ECS Journal of Solid State Science and Technology
For a carbon nanotube field effect transistor (CNTFET) the ballistic I-V characteristics have been investigated theoretically with respect to ambient temperature for both the p-i-n tunnel FET (TFET) and n-i-n metal-oxide-semiconductor FET (MOSFET). The performance stability of a TFET at higher temperatures, especially in subthreshold regime in which the n-i-n device exhibits a devastating characteristic, is appreciable. Alongside very low subthreshold swing even at a temperature beyond 300 K, a p-i-n tunnel FET could be a more reliable choice for operating in a wide range of temperatures. The subthreshold swing, transconductance, output conductance, saturation mechanism and on/off current ratio are also considered with respect to CNT diameter as well. A lower diameter lessens some negative effects of operating at a high temperature. All the results can be realized based on the energy band diagram of the device and the Fermi functions of source and drain. This trend gives a valuable insight into exploring the changes in 1D device characteristics.
Carbon nanotube (CNT) could be exploited as a channel or source/drain region in field effect transistors (FETs). We theoretically investigate the impact of CNT doping level on a coaxially gated CNTFET's performance in the ballistic regime. The results show that the transconductance and subthreshold swing are independent of the CNT doping value. But threshold voltage and output conductance strongly depend on the channel doping level. It seems that the most important impact of CNT doping is the change in off-state current values resulting in a shift in the transfer characteristics of the device. However, it is possible to choose an optimal value of CNT doping to obtain the highest performance.
23 January 2018 in ECS Journal of Solid State Science and Technology
This work compares the changes in performance of a carbon nanotube CNT-based n-i-n metal-oxide-semiconductor MOSFET and p-i-n tunnel field effect transistor TFET based on different dielectric values of gate κc and source/drain regions κsd. The results prove that at a constant κsd a higher κc improves transconductance gm, output conductance gd, ON-state current, subthreshold swing SS and may lower the threshold voltage VT. However, at a constant κc for an n-i-n MOSFET the performance does not change significantly with κsd, but gd increases. For the p-i-n TFET gm, gd and ON-state current degrade prominently while the minimum current declines and SS may improve. Also two different dielectrics for source κs and drain κd could provide TFET with a lower power-higher performance characteristic. The results are given based on certified NEGF formalism and are explained based on semiclassical discussion with respect to energy band diagram concept. This method simplifies the realization of device's performance optimization. Due to 1D transport properties of CNTs the results could be applied to any device with 1D electronic transport characteristics.