29 October 2012 in International Journal of Energy Research
The hydrogen storage properties of Ti1−xScxMnCr (x = 0.05, 0.10, 0.15, 0.22, 0.27 and 0.32) alloys are studied by pressure-composition isotherms at 0–60 °C and 1 kPa–4 MPa. The relevant crystal structures of the alloys and their hydrides are examined by the X-ray diffraction and electron microscopy. The alloys are basically C14 type Laves phase with slightly different lattice parameters owing to the difference in composition. Except for x = 0.05 alloy, the bulk samples of these alloys can be easily activated under ambient conditions and attain the maximum hydrogen storage capacities during the initial hydrogenation. As Sc content increases, the hydrogen storage capacity of the alloy increases whereas the pressure of the absorption/desorption plateau decreases. No hydrogen-induced disproportionation is observed, and the hydrogen-induced defects and pulverization are not severe after hydriding/dehydriding cycles of these alloys. The Ti0.78Sc0.22MnCr alloy exhibits the best reversible hydrogen storage capacity of ~2 wt% in between 1 and 4000 kPa at room temperature. Except for the x = 0.32 alloy, the average thermodynamic values of |ΔH| and |ΔS| in the system increase approximately linearly with Sc content in the alloys. The thermogravimetry-differential scanning calorimetry (TG-DSC) on desorption of the hydride of Ti0.68Sc0.32MnCr indicates that the thorough release of hydrogen in the alloy can be achieved at 658 K. Copyright © 2012 John Wiley & Sons, Ltd.
1 December 2005 in Journal of the American Ceramic Society
1 April 2012 in Microporous and Mesoporous Materials
31 July 2013 in Metallurgical and Materials Transactions A
24 October 2008 in Metallurgical and Materials Transactions A
30 June 2008 in Journal of Alloys and Compounds