14 November 2018 in RSC Advances
Biochars have been successfully used to treat wastewater and contaminated soils.
21 November 2018 in Royal Society Open Science
Biochars have been successfully used to reduce bioavailability and leaching of heavy metals in contaminated soils. The efficiency of biochar to immobilize heavy metals can be increased by reducing the particle size, which can increase the surface area and the cation exchange capacity (CEC). In this study, the empty fruit bunch biochar (EFBB) of oil palm was separated into two particle sizes, namely, fine (F-EFBB < 50 µm) and coarse (C-EFBB > 2 mm), to treat the contaminated soil with Cd and Pb. Results revealed that the addition of C-EFBB and F-EFBB increased the pH, electrical conductivity and CEC of the contaminated soil. The amounts of synthetic rainwater extractable and leachable Cd and Pb significantly decreased with the EFBB application. The lowest extractable and leachable Cd and Pb were observed from 1% F-EFBB-treated soil. The amount of extractable and leachable Cd and Pb decreased with increasing incubation times and leaching cycles. The application of F-EFBB to Cd and Pb-contaminated soil can immobilize the heavy metals more than that of C-EFBB. Therefore, the EFBB can be recommended for the remediation of heavy metal-contaminated soils, and a finer particle size can be applied at a lower application rate than the coarser biochar to achieve these goals.
27 November 2021 in Soil and Sediment Contamination: An International Journal
Biochar can be an alternative sorbent to the high cost activated carbon for wastewater treatment. Its adsorption capacity for heavy metals can be increased by magnetizing it with iron. In this study, we compared the physiochemical properties and sorption capacity of an iron-coated fine empty fruit bunch biochar (IC-EFBB) for Pb with a commercially available activated carbon (AC) and the uncoated fine empty fruit bunch biochar (EFBB). The results revealed that the AC had greater micropores surface area (671.14 m2 g−1), compared to the IC-EFBB (25.79 m2 g−1) and EFBB (2.57 m2 g−1). On the other hand, the IC-EFBB had the highest pH, and content of functional groups (OH and CO) while the EFBB had the highest total oxygen containing functional groups, CEC, and the lowest PZC. The sorption data of Pb by EFBB, IC-EFBB and AC were better fitted to the Langmuir adsorption as indicated by the R2 (1.00, 1.00 and 0.98, respectively) and RMSE values (0.009, 0.017 and 0.428, respectively). The IC-EFBB (142.86 mg g−1) had the highest adsorption capacity for Pb followed by EFBB (103.09 mg g−1) and the lowest was AC (50.51 mg g−1). The results indicated that surface area was not an important indicator for Pb sorption by the adsorbents but the amount of oxygen-containing functional groups, pH and CEC were the dominant factors. The IC-EFBB was readily separated from the aqueous solution using an external magnetic force. Therefore, it can be concluded that the IC-EFBB can be a very good alternative sorbent to remove heavy metals from wastewater.