Shyma Hameed Mohammad

Shyma Hameed Mohammad

Auto-generated profile, based on publicly available information

Shyma Hameed Mohammad


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2020 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
TATaha H. Abood Al-Saadi
Taha H. Abood Al-Saadi
EDEntihaa G. Daway
Entihaa G. Daway
SMShyma Hameed Mohammad
Shyma Hameed Mohammad
MMMohanad Kadhim Mejbel
Mohanad Kadhim Mejbel

1 January 2024 in Material Design & Processing Communications
Verified
Journal Article
Open access
SMShyma Hameed Mohammad
Shyma Hameed Mohammad
TATaha H. Abood Al-Saadi
Taha H. Abood Al-Saadi
EDEntihaa G. Daway
Entihaa G. Daway
MMMohanad Kadhim Mejbel
Mohanad Kadhim Mejbel
Foaming or porous geopolymers can be utilized in various engineering applications, including heat and acoustic insulations, as well as passive fire protection in building materials. They are ecofriendly materials, as no significant production power is required. In this study, geopolymers possessing foaming features involving lightweight and porous materials were successfully created through the reaction of sodium hydroxide solution 6 M with powder of waste glass MG without/with rice husk (RH) 20 wt.% of heat treated (212, 420, and 600 μm) utilized as the foaming agent. The effect of rice husk ash (RHA) and various sizes of RH additives on the thermal treatment (volume and weight changes, percentage), compressive strength, and microstructure (pore content) was assessed. The results show swelling (foaming behavior) for MG‐N6, MGB‐N6, MGR212‐N6, and MGR600‐N6 at 550°C, unlike the MGR420‐N6 formula. Also, a high‐volume change (percentage) for MGR420‐N6 paste at 650°C was noticed. Additionally, foaming behavior (high volume expansion) appeared for all thoughtful pastes after treatment at 750°C. The weight loss for all specimens in the range of 10%–27% and a high percentage of weight changes for MGR400‐N6 and MGR600‐N6 were noticed. Low values of compressive strength (2.74–14.5 MPa) were recorded for all formulas studied. These synthesized materials, geopolymers containing glass waste and RH powder, resulting from this study, are highly recommended, mostly for thermal and acoustic insulation materials demanding lightweight, porosity, and low mechanical properties.

1 January 2026 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
EDEntihaa G. Daway
Entihaa G. Daway
TATaha H. Abood Al-Saadi
Taha H. Abood Al-Saadi
SMShyma Hameed Mohammad
Shyma Hameed Mohammad
MMMohanad Kadhim Mejbel
Mohanad Kadhim Mejbel
This study investigates geopolymer pastes made from window and soda bottle glass waste, used as solid raw materials and serving as the primary source of aluminosilicate materials, activated with sodium silicate. Thermal treatment induced foaming behavior, with significant volume expansion and reduced compressive strength, suggesting potential for insulation applications. In the production of geopolymer pastes, sodium silicate solution (Na 2 SiO 3 37 wt.%) was used as alkaline activator for the solid component with various ratios (0.33 and 0.3) as liquid to solid (L/S) for the (G‐S and W‐S) paste formulas, respectively. Mechanical properties represented by compressive strength at 7 and 28 days of the two synthesized pastes (G‐S and W‐S) were assessed. Additionally, the two formulas (G‐S and W‐S) were subjected to heat treatment at (450°C, 550°C, 650°C, and 750°C) for 1 h with a heating rate of 10 °C/min were tested. Also, volume and weight changes as percentages (ΔV% and ΔW%) and scanning electron microscopy (SEM) after heat treatment of the two prepared formulas were evaluated as indicators of foaming materials. Results indicated that the volume changes generally increased with increasing thermal treatment temperatures (64.4%–314.36%) for G‐S and (189.2%–697.4%) for W‐S, which is a sign of foaming behavior. Additionally, under the same heat treatment circumstances, the W‐S pastes showed the greatest weight loss (15.1%–17.6%) compared to the G‐S pastes (14.23%–14.49%). Also, the compressive strength values (84.25 and 75.5 MPa) for W‐S paste and (13.5 and 77.5 MPa) for G‐S paste after curing for 7 and 28 days, respectively, were recorded. After thermal treatment, the compressive strength values for the two formulas (W‐S and G‐S) ranged from 0.5 to 6.39 MPa, reflecting the formation of pores (lightweight materials). This research reported on the synthesis of foaming geopolymers based on glass waste, meeting requirements for low compressive strength, high porosity, and light weight under thermal treatment, making them ideal for engineering applications such as acoustic insulation, inertness, and thermal insulation in buildings.