This letter presents a data-driven solution to the discrete-time infinite horizon linear quadratic regulator (LQR) problem. The state feedback gain is computed directly from a batch of input and state data collected from the plant. Simulation examples illustrate the convergence of the proposed solution to the optimal LQR gain as the number of Markov parameters tends to infinity. Experiments in an uninterruptible power supply are presented, which demonstrate the practical applicability of the design methodology.
1 March 2019 in IEEE Transactions on Control Systems Technology
This brief proposes a tuning methodology for proportional-resonant (PR) controllers by using the design philosophy of the Ziegler-Nichols forced oscillation method. Unlike such related methods that are usual for proportional-integral-differential design, and those that have been recently proposed for PR controllers, the method in this brief is not restricted to plants whose Nyquist diagram crosses the negative real axis. It involves a feedback experiment with an adjustable phase relay, which allows the identification of the most appropriate point of the frequency response for each class of plants. The proposed method, which also includes tuning formulas that provide appropriate stability margins for each class of plants, is analyzed in detail for three examples, showing its wide applicability.
30 March 2021 in IEEE Transactions on Industrial Electronics
Uninterruptible power supply (UPS) is an electronic power device that delivers voltage to critical loads and whose application must satisfy standardized performance requirements. Usual control techniques demand the UPS model. In this article, we propose a simple, model-free procedure based on the generalized forced oscillation method to design the control system of a UPS output stage. The procedure involves the design of an inner current loop with a proportional gain and a proportional-multiresonant controller in the output voltage loop. We also compare the closed-loop results obtained in a single-phase 3.5 kVA UPS with the IEC 62040-3 performance criteria and show that the results are equivalent to model-based approaches.