1 June 2017 in Composites Part B: Engineering
16 February 2018 in Journal of Polymer Science Part A: Polymer Chemistry
17 June 2020 in Textile Research Journal
The nylon 6 (PA6)/polyurethane (PU) debris produced during the sanding process would result in a serious resource waste and environmental hazard if disposed of inappropriately. Therefore, this study proposed a simple process for separating and recycling PA6 and PU components of PA6/PU debris. Results revealed that the instantaneous dissolution of PU in N,N-dimethylformamide was independent of temperature and time but related to the quantity of the solvent. Further investigation showed that 43.2% of waste PA6/PU debris was dissolved at room temperature, with pulp density of 10% and within 10 minutes, indicating that PA6 and PU could be quickly separated from the waste PA6/PU debris. In addition, proton nuclear magnetic resonance indicated that the dissolved PU could be recovered by selective precipitation-stripping using an equal amount of deionized water. Moreover, the chemical structure analysis disclosed that the PU in PA6/PU debris should be polyether PU synthesized by reacting with methylene diphenyl diisocyanate and polyether polyols. Besides, the stable chemical structure and thermal properties of separated samples observed from differential scanning calorimetry and thermogravimetry results confirmed that the recycling products could be reused as recycled plastic materials.
9 April 2021 in Journal of Materials Science
21 November 2018 in Royal Society Open Science
The characteristics of pure α - and β -form of the cyclic dimer (1,8-diazacyclotetradecane-2,9-dione) were systematically and integrally investigated during this study. The results showed that the α -form could dissolve and rapidly transform into the β -form in methanol, and in caprolactam solution at a lower temperature, an interesting transition occurred and formed co-precipitates, which refract colourful light under PLM. However, these dimers can aggregate in water, and they are then transformed into multi-slice layers and compact structures. The detailed transition behaviours between the two forms were further measured by FT-IR, XRD and DSC by varying the temperature from 25°C to 360°C, respectively, which showed that there are two endothermic transitions over the course of the heating programme. At a temperature of approximately 242°C, the β crystals were initially converted into α crystals, and then they melted when the temperature reached over 345°C. A video recorded under a light microscope also showed that the sublimation of the β cyclic dimer occurred after the transition. However, the α -form might sublimate at temperatures lower than 150°C when mixed with volatile matter.
30 June 2022 in Macromolecules