4 April 2016 in Applied Physics Letters
Conventional, commercially available terahertz (THz) polarizers are made of uniformly and precisely spaced metallic wires. They are fragile and expensive, with performance characteristics highly reliant on wire diameters and spacings. Here, we report a simple and highly error-tolerant method for fabricating a freestanding THz polarizer with nearly ideal performance, reliant on the intrinsically one-dimensional character of conduction electrons in well-aligned carbon nanotubes (CNTs). The polarizer was constructed on a mechanical frame over which we manually wound acid-doped CNT fibers with ultrahigh electrical conductivity. We demonstrated that the polarizer has an extinction ratio of ∼−30 dB with a low insertion loss (<0.5 dB) throughout a frequency range of 0.2–1.1 THz. In addition, we used a THz ellipsometer to measure the Müller matrix of the CNT-fiber polarizer and found comparable attenuation to a commercial metallic wire-grid polarizer. Furthermore, based on the classical theory of light transmission through an array of metallic wires, we demonstrated the most striking difference between the CNT-fiber and metallic wire-grid polarizers: the latter fails to work in the zero-spacing limit, where it acts as a simple mirror, while the former continues to work as an excellent polarizer even in that limit due to the one-dimensional conductivity of individual CNTs.
8 December 2021 in Optics Express
Tunable surface plasmon resonance-based graphene nanoribbon (GNR) terahertz (THz) polarizers with adjustable operating frequency are proposed in this work. While conventional THz polarizers lack robustness and tunability, recently reported graphene-based metastructure polarizers have complex fabrication processes and comparatively smaller extinction ratios (ERs). A comprehensive study using finite-difference time-domain (FDTD) simulation technique reveals high ER, broad tunability, near-perfect degree of polarization (DOP), and low insertion loss for our proposed single and double stage GNR polarizers. The operating frequency of these narrow band polarizers can be tuned by varying GNR width, GNR pitch, chemical potential, and substrate material. Our optimized THz polarizer has an ER of 30 dB which is comparable to the commercially available THz polarizers. The maximum insertion losses within the tunable frequency range were found to be 0.24 dB and 1.87 dB for single and double stage GNR polarizers, respectively, which are substantially low. We compared the performance of the proposed structures with recently demonstrated graphene-based metastructure polarizers. The polarizers are promising for the design of photonic devices, integrated photonic circuits, and optoelectronic systems.
24 January 2018 in Physical Review Materials
The increasing interest in mobile and wearable technology demands the enhancement of functionality of clothing through incorporation of sophisticated architectures of multifunctional materials. Flexible electronic and photonic devices based on organic materials have made impressive progress over the past decade, but higher performance, simpler fabrication, and most importantly, compatibility with woven technology are desired. Here we report on the development of a weaved, substrateless, and polarization-sensitive photodetector based on doping-engineered fibers of highly aligned carbon nanotubes. This room-temperature-operating, self-powered detector responds to radiation in an ultrabroad spectral range, from the ultraviolet to the terahertz, through the photothermoelectric effect, with a low noise-equivalent power (a few ) throughout the range and with a -factor value that is twice as large as that of previously reported carbon nanotube-based photothermoelectric photodetectors. Particularly, we fabricated a -m-long device consisting of tens of junctions and weaved it into a shirt. This device demonstrated a collective photoresponse of the series-connected junctions under global illumination. The performance of the device did not show any sign of deterioration through 200 bending tests with a bending radius smaller than 100 as well as standard washing and ironing cycles. This unconventional photodetector will find applications in wearable technology that require detection of electromagnetic radiation.
16 October 2023 in Nanoscale Advances
An ingenious double-grating metamaterial-based ultrathin-broadband absorber consisting of AlGaAs–Ge–GaAs on a titanium film operating in the visible to infrared wavelength was designed in this work. This structure is capable of overcoming the Shockley–Queisser (SQ) limit and the tunneling junction effect of tandem solar cells. Our comprehensive study revealed the structure's absorption mechanism using the finite-difference time-domain (FDTD) technique, which exhibited excellent short-circuit current density and high absorption. Our proposed ultrathin structure of 410 nm thickness provided a high average absorption of 82.2% and 99.7% under unpolarized and TM-polarized light for a wavelength range of 450–2000 nm, respectively. Additionally, we observed high incidence angle tolerability under the plane wave and thermal stability over time for our proposed grating structure. The performance analysis of our proposed structure as an absorber layer of a solar cell revealed its high power conversion efficiency (PCE) of 31.7% with an excellent short-circuit current density of 47.1 mA cm−2 for AM 1.5 G solar irradiance. The double-grating metamaterial absorber structure has enormous potential for diverse applications such as solar harvesting, thermoelectric generation, and photodetection.
1 March 2024 in Optics Express
We proposed multilayered graphene (Gr)-based surface plasmon resonance-induced high-performance terahertz (THz) modulators with tunable resonance frequencies. Previously reported Gr metamaterials-based THz plasmonic modulators had small group delay, low extinction ratio (ER), and difficult-to-tune resonant frequency without changing structural parameters in the THz range. A comprehensive investigation employing the finite-difference time-domain (FDTD) simulation technique revealed high group delay, broad tunability independent of structural parameters, and large ER for our proposed quadband and pentaband plasmonic modulators. We obtained tunable group delays with a maximum of 1.02 ps and 1.41 ps for our proposed quadband and pentaband plasmonic modulators, respectively, which are substantially greater compared to previously reported Gr-based metamaterial structures. The maximum ER of 22.3 dB was obtained, which was substantially high compared to previous reports. Our proposed modulators were sensitive to the polarization angle of incident light; therefore, the transmittance at resonant frequencies was increased while the polarization angle varied from 0° to 180°. These high-performance plasmonic modulators have emerging potential for the design of optical buffers, slow light devices, multistop band filters, integrated photonic circuits, and various optoelectronic systems.
27 November 2017 in Physical Review Materials
The origin of highly efficient iodine doping of carbon nanotubes is not well understood. Relying on first-principles calculations, we found that iodine molecules in contact with a carbon nanotube interact to form monoiodide or/and polyiodide from two and three as a result of removing electrons from the carbon nanotube -type doping). Charge per iodine atom for monoiodide ion or iodine atom at end of iodine chain is significantly higher than that for . This atomic analysis extends previous studies showing that polyiodide ions are the dominant dopants. Moreover, we observed isolated I atoms in atomically resolved transmission electron microscopy, which proves the production of monoiodide. Finally, using Raman spectroscopy, we quantitatively determined the doping level and estimated the number of conducting channels in high electrical conductivity fibers composed of iodine-doped double-wall carbon nanotubes.