9 May 2022 in Applied Physics Letters
The performance of x-ray free electron lasers and ultrafast electron diffraction experiments is largely dependent on the brightness of electron sources from photoinjectors. The maximum brightness from photoinjectors at a particular accelerating gradient is limited by the mean transverse energy (MTE) of electrons emitted from photocathodes. For high quantum efficiency (QE) cathodes like alkali-antimonide thin films, which are essential to mitigate the effects of non-linear photoemission on MTE, the smallest possible MTE and, hence, the highest possible brightness are limited by the nanoscale surface roughness and chemical inhomogeneity. In this work, we show that high QE Cs3Sb films grown on lattice-matched strontium titanate (STO) substrates have a factor of 4 smoother, chemically uniform surfaces compared to those traditionally grown on disordered Si surfaces. We perform simulations to calculate roughness induced MTE based on measured topographical and surface-potential variations on the Cs3Sb films grown on STO and show that these variations are small enough to have no consequential impact on the MTE and, hence, the brightness.
5 January 2023 in Physical Review Applied
The brightness of electron beams emitted from photocathode sources plays a critical role in determining the performance of x-ray free-electron lasers and ultrafast electron-diffraction applications. In order to achieve the maximum brightness, the electrons need to be emitted from a photocathode with the lowest-possible mean transverse energy (MTE). Recent investigations have shown that capping a (110) photocathode with a monolayer of graphene can protect the quantum efficiency (QE) from long-term exposure to varying vacuum conditions. However, there have been no studies that investigate the effects that a monolayer of graphene has on the MTE. Here, we report on measurements of a graphene-coated (110) single crystal near the photoemission threshold for room and liquid-nitrogen temperatures. At room temperature, a minimum MTE of 25 meV is measured at 295 nm. At liquid-nitrogen temperatures, a minimum MTE of 9 meV is measured at the photoemission threshold of 290 nm.
19 September 2023 in Physical Review Accelerators and Beams
Reducing the mean transverse energy (MTE) of electrons emitted from photocathodes will improve the performance of linear accelerator applications like x-ray free electrons lasers (XFELs) and ultrafast electron diffraction (UED) and microscopy (UEM) experiments. Metallic photocathodes are popular for these applications due to their convenience of use. However, they typically have a very low quantum efficiency and require a large laser fluence in order to extract the desired charge density for applications like XFELs and single-shot UED/UEM experiments. Recent theoretical investigations have shown that nonlinear photoemission effects of multiphoton emission and electron heating increase the MTE dramatically at these large laser fluences. In this paper, we report on measurements of nonlinear near-threshold photoemission from a graphene-coated Cu(110) photocathode at laser pulse lengths of 130 fs, 1 ps, and 10 ps. We extrapolate our measured data to find the ideal irradiating photon energy that results in a minimum MTE from such metallic photocathodes for charge densities relevant to photoinjectors and specify quantum efficiency requirements to obtain the thermally limited MTE at these charge densities.
1 September 2023 in Review of Scientific Instruments
Novel photocathode materials like ordered surfaces of single crystal metals, epitaxially grown high quantum efficiency thin films, and topologically non-trivial materials with dirac cones show great promise for generating brighter electron beams for various accelerator and ultrafast electron scattering applications. Despite several materials being identified as brighter photocathodes, none of them have been tested in electron guns to extract electron beams due to technical and logistical challenges. In this paper, we present the design and commissioning of a cryocooled 200 kV DC electron gun that is capable of testing a wide variety of novel photocathode materials over a broad range of temperatures from 298 to 35 K for bright electron beam generation. This gun is designed to enable easy transfer of the photocathode to various standard ultra-high-vacuum surface diagnostics and preparation techniques, allowing a full characterization of the dependence of beam brightness on the photocathode material and surface properties. We demonstrate the development of such a high-voltage, high-gradient gun using materials and equipment that are easily available in any standard university lab, making the development of such 200 kV electron guns more accessible.