Selective laser melting can be used to create custom‐made monolith reactor components with embedded microscale catalytic sites. Doping with noble metals (0.01–0.04 % of Pt, Ir, Ru, or Rh) gave clean incorporation of the active metal particles metals. Yet catalytic activity was low, due to distribution of the active particles between the surface and the bulk of the monolith. Switching to cobalt enabled doping in higher amounts (1.5–2.0 %) with corresponding increase in activity. Using borohydride hydrolysis as a test reaction, we showed that a combined stainless steel and cobalt monolith was active in both batch and continuous systems, for at least 48 h, albeit with some loss of active material. The advantages and limitations of this catalyst/reactor preparation method are discussed.
The challenge of moving to a carbon‐free energy economy is highlighted in the context of technology and materials restrictions. Many technologies needed for the so‐called energy transition depend on critical metals such as platinum, lithium, iridium and cobalt. Here we focus on solid borohydride salts as hydrogen carriers, studying catalysts for hydrogen release. We combine metal 3D printing technology and a Raney‐type leaching process to make structured macroscopic catalyst/reactor monoliths of cobalt, aluminium and stainless steel with well‐defined micropores. Remarkably, the blank catalyst samples, which are made only from aluminium and stainless steel (Al‐SS), show high activity and, importantly, high stability in borohydride hydrolysis, with no mass loss and no surface poisoning. The batch results are confirmed in a continuous setup running for 96 h. Catalyst performance is attributed to the stable porous structure, the mechanical stability of the stainless steel macrostructure, and the presence of accessible Al(OH)x sites. This research shows a clear contribution to sustainability based on multi‐factor comparison: The Al‐SS catalyst outperforms the state‐of‐the‐art on mechanical and chemical durability, it is both PGM‐free and CRM‐free, and its preparation follows a simple, scalable and low‐waste procedure.
We report the design, fabrication, and testing of 3D‐printed Al–stainless steel reactor‐catalyst monoliths for potassium borohydride hydrolysis. Three scaffold geometries—Gyroid, Schwarz P, and Schwarz P4534—were produced via selective laser melting. The monoliths were subjected to tailored acid and base leaching, increasing internal porosity and exposing and activating the catalytic sites. Structural and compositional analyses, including SEM‐EDX, XPS, and x‐ray diffraction (XRD), confirmed the homogeneous distribution of Al, Fe, Ni, and Cr, as well as the formation of an FeAl crystalline phase. Hydrogen release experiments at industrially relevant conditions showed that the Schwarz P and P4534 geometries gave the fastest hydrogen evolution, whereas the Gyroid structure was the slowest. This study highlights how 3D‐printed macrostructure design and surface activation can be combined to optimize metallic catalysts for a variety of applications.