Passivating contacts based on poly‐Si/SiOx structures also known as TOPCon (tunnel oxide passivated contacts) have a great potential to improve the efficiency of crystalline silicon solar cells, resulting in more than 26% and 24% for laboratory and industrial cells, respectively. This publication gives an overview of the historical development of such contact structures which have started already in the 1980s and describes the current state‐of‐the‐art in laboratory and industry. In order to demonstrate the great variety of scientific and technological research, four different research topics are addressed in more detail: (i) the superior passivation quality of TOPCon structures made it necessary to re‐parametrize intrinsic recombination in silicon, (ii) the control of diffusion of dopants through the intermediate SiOx layer is essential to optimize passivation and transport properties, (iii) single‐sided deposition of the poly‐Si layer would reduce process complexity for industrial TOPCon cells, and (iv) silicon‐based tunnel junctions for perovskite–silicon tandem cells can be fabricated using the TOPCon technology.
Recently, the charge carrier transport mechanism of passivating contacts, which feature an ultra-thin oxide layer, has been investigated by studying temperature-dependent current-voltage (I-V) characteristics. The measurement revealed that tunneling is the dominant transport path for tunnel oxide passivated contact (TOPCon) with wet chemically grown oxide layer. Furthermore, higher annealing temperatures led to the deterioration of the surface passivation most likely because of excessive pinhole formation. In this contribution, we are going to extend the previous study by analyzing other interfacial oxides as well. We will show that extremely low recombination current densities and low contact resistivity values can be achieved by differently processed TOPCon structures, which are characterized by a predominant tunnel transport as well as one where current flow via pinholes likely predominates. Furthermore, an I-V ( T ) study on solar cells with passivating rear contact reveals that fill factor transitions from a nonlinear to linear behavior when the Si layer turns partially crystalline.
1 September 2021 in Solar Energy Materials and Solar Cells