This paper transforms sequential power flow problem to a parallel problem and solves it on GPU. In particular, we implement parallel Gauss-Seidel solver, Newton-Raphson solver, and P-Q decoupled solver using CUDA (Compute Unified Device Architecture) on GPU. The aim is to investigate the performance of the three different parallel power flow solvers. We use four IEEE standard power systems and one actual running power system from Shang dong Province as the test cases when comparing the speedups that a GPU system can provide. The results show that Newton-Raphson solver has the best speedup when it is operated on GPU, Gauss-Seidel solver performs the worst, and P-Q decoupled solver is in the middle. The test results also indicate that when the size of the system is small, GPU does not seem to have advantages over CPU from computation time perspective. However, as the size of the system increases, the advantages of GPU becomes more clear. For instance, when the system has close to one thousand bus counts, the GPU can provide as high as over fifty-three times speedup.
With the development of electric vehicles and smart grid, vehicle-to-grid (V2G) will become an inevitable. This paper presented a smart meter applied to vehicle-to-grid. The smart meter is introduced according to the function and characteristic of energy measurement chip ADE7758 and the microprocessor chip S3C2440 is also used in the circuit system. According to the difference of phase angle between the current and the voltage waveform in the electric grid, the energy consuming direction can be judged. Therefore, the consumption energy or export energy of an electric vehicle can be calculated. With the smart meter, bidirectional communication and remote control can be achieved between electric vehicle and the grid. Besides the special functions above, the smart meter is able to measure voltage and current, active and reactive power, and other electric parameters.