11 June 2018 in Nature Catalysis
5 February 2018 in Angewandte Chemie International Edition
Understanding the pathways of catalyst degradation during the oxygen evolution reaction is a cornerstone in the development of efficient and stable electrolyzers, since even for the most promising Ir based anodes the harsh reaction conditions are detrimental. The dissolution mechanism is complex and the correlation to the oxygen evolution reaction itself is still poorly understood. Here, by coupling a scanning flow cell with inductively coupled plasma and online electrochemical mass spectrometers, we monitor the oxygen evolution and degradation products of Ir and Ir oxides in situ. It is shown that at high anodic potentials several dissolution routes become possible, including formation of gaseous IrO3. On the basis of experimental data, possible pathways are proposed for the oxygen‐evolution‐triggered dissolution of Ir and the role of common intermediates for these reactions is discussed.
4 July 2017 in Scientific Reports
Tin-based oxides are attractive catalyst support materials considered for application in fuel cells and electrolysers. If properly doped, these oxides are relatively good conductors, assuring that ohmic drop in real applications is minimal. Corrosion of dopants, however, will lead to severe performance deterioration. The present work aims to investigate the potential dependent dissolution rates of indium tin oxide (ITO), fluorine doped tin oxide (FTO) and antimony doped tin oxide (ATO) in the broad potential window ranging from −0.6 to 3.2 VRHE in 0.1 M H2SO4 electrolyte. It is shown that in the cathodic part of the studied potential window all oxides dissolve during the electrochemical reduction of the oxide – cathodic dissolution. In case an oxidation potential is applied to the reduced electrode, metal oxidation is accompanied with additional dissolution – anodic dissolution. Additional dissolution is observed during the oxygen evolution reaction. FTO withstands anodic conditions best, while little and strong dissolution is observed for ATO and ITO, respectively. In discussion of possible corrosion mechanisms, obtained dissolution onset potentials are correlated with existing thermodynamic data.
17 October 2017 in ChemSusChem
21 March 2018 in The Journal of Physical Chemistry C
5 February 2018 in Angewandte Chemie
Dem Wissen über Reaktionsmechanismen beim Katalysatorabbau während der Sauerstoffentwicklung kommt eine Schlüsselrolle bei der Weiterentwicklung von effizienteren und stabileren Elektrolyseuren zu, da die korrosiven Bedingungen an der Anode selbst für vielversprechende Materialien auf Iridium‐Basis problematisch sind. Der Auflösungsmechanismus ist von komplexer Natur, und Zusammenhänge mit der Sauerstoffentwicklung sind wenig erforscht. Die Kopplung einer Rasterflusszelle mit Massenspektrometrie ermöglicht es, Sauerstoffentwicklungs‐ und Abbauprodukte in situ zu detektieren. Demnach sind bei hohen anodischen Potentialen mehrere Auflösungswege möglich, welche auch die Bildung von gasförmigem IrO3 beinhalten. Auf der Basis der experimentellen Daten werden mögliche Reaktionswege der, durch Sauerstoffentwicklung bedingten, Auflösung von Iridium aufgezeigt und die Rolle von gemeinsamen Intermediaten dieser Reaktionen diskutiert.