13 December 2023 in IEEE Transactions on Power Electronics
With the increasing demand for power supply in data centers, resonant switched-capacitor converters with high power density and high efficiency have been widely studied and applied. In this article, a 3-to-1 high-performance switched-capacitor converter is proposed, and optimizing methods are investigated to improve its performance. First, a detailed analysis of its working states under different modes is conducted. Second, the state-plane analysis is conducted to obtain the relationship between its state variables and various circuit parameters. By utilizing these relationships, the circuit parameters are optimized and designed, increasing the efficiency under zero voltage switching (ZVS) mode. Third, using the proposed 3-to-1 circuit structure, a cascaded switched-capacitor converter with a step-down ratio of 6-to-1 is constructed. In order to verify the theoretical analysis, a 48-to-8 V experimental prototype is built. The experimental prototype achieves 1078 W/in 3 power density. Its peak efficiency reaches 97.4%, and full-load efficiency reaches 94.2%.
9 December 2024 in IEEE Transactions on Power Electronics
Resonant switched-capacitor converters have been widely studied and applied with the ability of high efficiency and power density, which well meets the requirements of data center power supply systems. However, due to its operation in DC transformer (DCX) mode, it does not have the ability to regulate voltage, which limits its application in certain situations and makes it difficult to meet the continuously increasing demand for data center applications. This article proposes a soft-switching high voltage step-down ratio hybrid switched-capacitor converter with voltage regulation capability and their corresponding phase-shift voltage regulation method. The voltage regulation principle and soft switching characteristics are analyzed in detail through mathematical derivation. In order to verify the theoretical analysis, an experimental prototype is built. The prototype can achieve 12 V output voltage under 40–60 V input voltage and the power density achieves 1987 W/in3 with 98.4% peak efficiency.
1 July 2026 in IEEE Transactions on Power Electronics
In recent years, the rapid development of information technology has led to increasing power supply pressure on data centers. In this application scenarios, resonant switched-capacitor converters that can achieve high efficiency and power density have become an indispensable part of data center power supply systems. This paper proposes a high voltage step-down ratio resonant switched-capacitor converter. The construction method of this converter topology can also provide strong support for the construction of other step-down ratio high performance RSC topologies. After detailed modal design in this paper, the proposed converter can operate in two different soft switching modes, ZCS and ZVS, which is of great significance for improving the efficiency of the converter. In order to ensure the optimal operation of the converter, this paper uses the state-plane analysis method to conduct in-depth analysis of the resonant state of the converter, and based on this, guides the design of various parameters. In order to verify the theoretical analysis, a 48-to-6 V experimental prototype with 60 A output current for data center applications is built in the laboratory. The prototype can ultimately achieve a peak efficiency of 98.2% and a power density of 1714 W/in3, demonstrating good overall performance.
20 June 2025 in IEEE Transactions on Power Electronics
For decades, switched-capacitor converters (SCCs) have been widely studied and applied with the ability of high efficiency and power density. With the continuous enrichment and expansion of its application scenarios, the voltage conversion ratio and working efficiency of SCCs are facing increasingly high requirements. This article proposes a high voltage step-down ratio switched-capacitor converter. This converter has obviously lower flying capacitor voltages than existing solutions, and thus, the effect of dc bias on multilayer ceramic capacitor is reduced and has a lower output impedance, thereby achieving higher working efficiency. In addition, the influence of capacitance on the output impedance of the converter is also analyzed in detail in this paper through mathematical derivation. In order to verify the theoretical analysis, an experimental prototype is built. The prototype can finally achieve a peak efficiency of 97.15%, which is significantly higher than existing solutions.