3 August 2026 in International Endodontic Journal
Aim: To compare four rotary nickel‐titanium (NiTi) file systems (Endostar E3 Azure, Endostar E3, VDW.ROTATE, and Mtwo) using a multimethod approach to evaluate their mechanical and metallurgical properties. Materials and Methods: Endostar E3 Azure, Endostar E3, VDW.ROTATE, and Mtwo (all size 25/0.06 with an S‐shaped cross‐section; 52 instruments per system) were evaluated. Mechanical performance was assessed through static and dynamic cyclic fatigue tests (each treated as a separate and independent test model) together with torsional resistance, bending and buckling tests; the number of cycles to fracture (NCF) was used to compare cyclic fatigue resistance across systems operated at different rotational speeds. Metallurgical characterisation included scanning electron microscopy (SEM) for fractographic and surface analysis, energy‐dispersive X‐ray spectroscopy (EDS) for surface elemental composition, and differential scanning calorimetry (DSC) for phase‐transformation temperatures. Results: Endostar E3 Azure and VDW.ROTATE recorded the highest cyclic fatigue resistance and did not differ from each other within the fatigue models; both surpassed the conventional‐alloy instruments ( p < 0.05). In the static model, Endostar E3 and Mtwo did not differ from each other ( p > 0.05). Endostar E3 yielded the highest maximum torque (0.63 ± 0.01 Ncm), bending force (13.84 ± 1.79 gF) and buckling load (14.37 ± 4.13 gF; p < 0.05), whereas VDW.ROTATE showed the greatest angular deflection (577.03° ± 98.59°; p < 0.05). DSC revealed R‐phase‐mediated multi‐step transformations in the heat‐treated files, with austenite finish (Af) temperatures near body temperature; the conventional‐alloy files exhibited a single low‐intensity peak consistent with a wholly austenitic state. EDS detected surface oxygen on the thermomechanically processed files, indicating the presence of a TiO 2 layer. Conclusions: Thermomechanically processed systems exhibited greater flexibility and longer fatigue life, whereas conventional NiTi instruments demonstrated higher rigidity and torque capacity. DSC‐based phase characterisation was consistent with the divergent mechanical outcomes observed among groups and offered a plausible metallurgical explanation, although the contributions of alloy processing and instrument design could not be separated within the present study design.
4 August 2026 in Akdeniz Diş Hekimliği Dergisi
AmaçPeriapikal radyolusent lezyonların büyük çoğunluğu pulpa nekrozuna bağlı enflamatuvar kökenli olmakla birlikte, bir kısmı non-endodontik ve malign patolojileri yansıtmakta; bu lezyonlar endodontik patolojiyi taklit ederek yanlış ya da gecikmiş tanıya yol açabilmektedir. Bu çalışma, diş hekimliği öğrencilerinin apikal lezyonları taklit edebilen ağız kanserlerine ilişkin bilgi ve klinik karar verme düzeylerini değerlendirmeyi amaçlamıştır.Gereç ve YöntemlerTanımlayıcı tipteki bu anket çalışmasına, klinik eğitim sürecindeki 3., 4. ve 5. sınıf öğrencileri kolayda örnekleme ile dahil edildi (n = 249). Literatüre dayalı geliştirilen 18 soruluk yapılandırılmış anketteki tek doğru yanıtı bulunan 6 soru üzerinden 0-6 puanlık bileşik bir bilgi/klinik karar skoru oluşturuldu. Veriler ki-kare ve Kruskal-Wallis testleriyle analiz edildi (P < 0.05).BulgularAltı bilgi sorusunda doğru yanıt oranı %69.1 ile %80.7 arasında değişti; en yüksek oranlar Stafne kemik kavitesi (%80.7) ve metastaz şüphesi (%80.3) sorularında elde edildi. Katılımcıların %36.5’i tüm soruları doğru yanıtladı. Bilgi/klinik karar skoru sınıf düzeyine göre anlamlı farklılık gösterdi (P < 0.001); ancak kıdemle doğrusal artmadı. En yüksek ortalama üçüncü sınıfta (5.03 ± 1.26), en düşük ise dördüncü sınıfta (3.43 ± 1.77) gözlendi. Biyopsi zamanlaması ve histopatolojik incelemenin gerekliliği konularında belirgin görüş ayrılığı saptandı.SonuçÖğrencilerin bilgi düzeyi genel olarak orta-yüksek olmakla birlikte, biyopsi ve histopatoloji konularındaki görüş ayrılıkları ile 4. sınıftaki göreli düşüş dikkat çekicidir. Bulgular, ağız kanserinin erken tanısına katkı sağlamak için ayırıcı tanı ve histopatoloji eğitiminin tüm klinik sınıflar boyunca güçlendirilmesi gerektiğine işaret etmektedir.