Polarized polymer light-emitting diodes (PLEDs) have been constructed utilizing friction-transferred poly(9,9-dioctylfluorene) (PFO) thin films. The friction transfer technique allows oriented PFO to be deposited directly onto an indium tin oxide anode without an alignment layer such as polyimide. Polarized absorption and photoluminescence spectra revealed that the polymer backbones are highly aligned in the friction direction. We fabricated PLEDs consisting of friction-transferred PFO as an emissive layer, vacuum-deposited bathocuproine as an electron transport and hole-blocking layer, and a vacuum-deposited LiF∕Al cathode. Highly polarized blue emission with an integrated polarization ratio of 31 and a luminance of up to 300cd∕m2 was observed from the PLEDs.
Uniaxially oriented films of -phase poly(9,9-dioctylfluorene) (PFO) were realized by a friction-transfer technique followed by thermal annealing and vapor treatments. Absorption and photoluminescence (PL) spectra show the characteristics of -phase: an additional absorption peak at and redshifted PL peaks compared with those of the usual nematic (N) phase. We fabricated polarized polymer light-emitting diodes utilizing oriented films of -phase PFO. Highly polarized -phase emission with an integrated polarization ratio of 51 was observed from the devices. The efficiency of the devices based on -phase reached , which is two times higher than that based on N-phase.