1 October 2019 in Journal of Cleaner Production
1 March 2013 in Cement and Concrete Composites
20 February 2013 in Journal of Composite Materials
Different montmorillonites were added to poly(vinyl alcohol) in order to improve their properties. The used montmorillonite’s were: Cloisite Na+ (Na), Nanofil (NF), and Cloisite 30B (30B). Poly(vinyl alcohol) + montmorillonite films, obtained by casting, were characterized by means of Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, X-ray diffraction pattern, transmission electron microscopy, water absorption, contact angle, and mechanical properties. Sodium and organically modified montmorillonites were used. The montmorillonite basal peak shifted to a lower angle for composites, with sodium montmorillonites, and the films were exfoliated–intercalated nanocomposites. Composites with organically modified montmorillonites presented a micro-morphology and the lowest water absorption. The best mechanical properties were obtained for the composite with sodium montmorillonites.
1 January 2011 in Key Engineering Materials
Polyvinylalcohol (PVA) is a polymer soluble in hot water, it has the property of film formation and it can improve the concrete performance. The effects of PVA modified with nano clay on the cement hydration reaction have been investigated by means of semiadiabatic calorimeter, FTIR spectroscopy and SEM. FTIR spectroscopy was employed to monitor chemical transformation of cement. The morphology of the different samples was compared by means of SEM micrographs. With the semiadiabatic calorimeter the hydration kinetic was measured to compare the heat rate of the admixtures materials. Fixing the water–cement ratio, w/c, in 0,45, the ratio of polymer to cement (p/c) was 2 wt% and the ratio of clay to polymer was 4 wt% (0.8wt.% related to cement). The polymer and modified polymer admixtures produced a retardation effect on the kinetic of cement hydration, but the clay acts as nucleating agent. The increase of the temperature with time was measured and a new model with four parameters was employed and the kinetic parameters were determined for each sample.
1 July 2016 in Construction and Building Materials
1 October 2021 in Environmental Geotechnics
The use of polymers can change the specific properties of natural soils. This study analyses the interaction between a natural fine sand, a clayey soil and anionic polyacrylamide (APAM). The laboratory results show that APAM, a superabsorbent polymer, increases the plasticity and the capacity of water absorption of the clay–APAM and sand–clay–APAM compacted composites. Free swelling and swelling pressure also increase with the addition of APAM. The sand–clay–APAM composite shows a higher unconfined compressive strength and a slight reduction in hydraulic conductivity. Microstructural analysis confirms the aggregation capacity of APAM and a reduction in the accumulated pore volume, which minimise liquid infiltration and soil erosion. Results demonstrate that the clay–APAM and sand–clay–APAM composites can be effective as liners and covers, respectively, in a landfill system.