This work aims at investigating the impact of an Earth-Air Heat eXchanger (EAHX) on the thermal comfort when it is added to a natural nighttime ventilation for a house located in Marrakech (Morocco), which is characterized by a hot semi-arid climate. The thermal behavior of the house associated with this cooling combination was assessed using dynamic simulations. Two transient models are used, the well-validated Type 460 model of trnsys software (Transient System Simulation) for the EAHX and a separate trnsys-based model for the building, recently validated using an onsite long-term monitoring of the house under study in the present work. Many configurations of the house ranging from the building without any passive technique to the building with envelope thermal insulation connected with the EAHX combined with natural nighttime ventilation strategy have been investigated. The results showed that the nighttime ventilation strategy alone keeps the operative temperature lower than the convenient 28 °C for 92% of the time during the cooling period. On the other hand, when the EAHX alone is used, the operative temperature is lower than 28 °C during 57% of the time during the hot season. Hence, it was concluded that the passive nighttime ventilation alone leads already to a great thermal comfort improvement; however, its combination with an additional EAHX system results in convenient temperatures lower than 28 °C for 99% of time during the complete cooling period. It is found also that by applying nighttime ventilation, the air blowing flowrate can be reduced by up to three air change per hour while keeping the same EAHX’ parameters.
Microscopic simulation is an established tool in traffic engineering and research in which aggregated traffic performance measures are inferred from the simulation of individual agents. Measures describing the safety and efficiency of road user interactions gain importance for recent developments such as automated vehicles and urban cycling. However, current simulation frameworks model interactions including cyclists without considering the constraints of two-wheeler dynamics (mechanics of a bicycle in motion) that limit feasible maneuvers in a cycling conflict. To address this issue, we propose to bring bicycle dynamics to traffic simulation. We demonstrate that a novel reformulation of the social force framework can create input signals for a controlled inverted pendulum bicycle model and thereby enable more realistic two-dimensional open space simulation of cyclist interactions. The inverted pendulum model introduces the need to stabilize the bicycle as a constraint to the reactive behavior of simulated cyclists. Furthermore, it enables the simulation of countersteering and weaving for stabilization. Our cyclist social forces have anisotropic force fields with respect to relative interaction position and orientation to describe the varying interaction constellations in open space. With these models, we simulate the yaw angle step response and four test cases with up to three cyclists to show that the generated trajectories notably differ from results obtained from a 2D bicycle model without roll angle simulation. Measurements of the maximum lateral path deviation and post-encroachment time show that these differences are relevant for typical applications. Our work demonstrates the potential of introducing physics-based bicycle dynamics to the microscopic simulation of individual road user interactions and the fundamental capability of our reformulated cyclist social forces to do so. Going further, we plan to calibrate and validate our model based on naturalistic cycling data to support the initial results of this work.
Microscopic traffic simulation is a popular tool in traffic research and planning. It enables the evaluation of interventions in a traffic system based on the movement of individual simulated agents. These can be for example infrastructural changes or the introduction of new road users like automated vehicles. To simulate cyclists, traditional simulation techniques have to be adapted. We propose a microscopic model describing bicycle interaction using the social force paradigm. Here we take into account bicycle kinematics, to create realistic bicycle paths. Qualitative evaluation shows simulated interactions with plausible cyclist trajectories.
Microscopic traffic simulation is a popular tool in traffic research and planning. It enables the evaluation of interventions in a traffic system based on the movement of individual simulated agents. These can be for example infrastructural changes or the introduction of new road users like automated vehicles. To simulate cyclists, traditional simulation techniques have to be adapted. We propose a microscopic model describing bicycle interaction using the social force paradigm. Here we take into account bicycle kinematics, to create realistic bicycle paths. Qualitative evaluation shows simulated interactions with plausible cyclist trajectories.
Microscopic simulation is an established tool in traffic engineering and research, where aggregated traffic performance measures are inferred from the simulation of individual agents. Additionally, measures describing the safety and efficiency of road user interactions gain importance for recent developments such as automated vehicles and urban cycling. However, current simulation frameworks model interactions including cyclists only with limited realism. To address this issue, we propose to bring bicycle dynamics to traffic simulation. We demonstrate that a novel reformulation of the social force framework can create input signals for a controlled inverted pendulum bicycle model and thereby enable a fully two-dimensional open space simulation of cyclist interactions. The inverted pendulum model introduces the need to stabilize the bicycle as a constraint to the reactive behavior of simulated cyclists. Furthermore, it enables the simulation of countersteering and weaving for stabilization. Our cyclist social forces have anisotropic force fields with respect to relative interaction position and orientation to describe the varying interaction constellations in open space. With these models, we simulate five single- and multi-cyclist test cases and show that the generated trajectories notably differ from results obtained from a 2D bicycle model without lean angle simulation. Measurements of the maximum lateral path deviation and post-encroachment time show that these differences are relevant for typical applications. Our work demonstrates the potential of introducing physics-based realistic bicycle dynamics to the microscopic simulation of individual road user interactions and the fundamental capability of our reformulated cyclist social forces to do so. Going further, we plan to calibrate and validate our model based on naturalistic cycling data to support the initial results of this work.