11 June 2019 in IEEE Transactions on Power Electronics
The five-level nested neutral-point-pilot (NPP) topology, as a new structure for converters, bears the advantages of a high power density, robustness and flexibility and is therefore suitable for high-voltage and high-power applications. For a multilevel converter, as the number of power electronic switches increases, the risk of switch failure increases, together with the complexity of fault detection and tolerance control. The requirements for a higher operational stability and reliability continue to grow. However, studies on fault tolerance for multilevel converters are limited. In this paper, a fault diagnosis and tolerance solution for a five-level nested NPP converter is proposed. For the fault diagnosis, a deep learning method integrating the wavelet packet transform (WPT) and long short-term memory (LSTM) is presented. Both open- and short-circuit switch failures can be precisely detected and located without the requirement of a large sample set. Two software-based control strategies for fault tolerance are adopted, and low-cost hardware reconfigurations are also implemented to prevent failure expansion and ensure continuous operation. Furthermore, the voltages of DC-link capacitors and flying capacitors are effectively balanced with the improved algorithm even when a failure occurs. Finally, the effectiveness of the fault-tolerant strategy are proven by simulations and experiments.
21 September 2017 in IEEE Transactions on Power Electronics
This paper presents the active capacitor voltage-balancing (ACVB) methods based on the dynamic model for a five-level nested neutral-point piloted (NNPP) converter using hybrid carrier modulation. The traditional hybrid carrier modulation provides natural voltage balancing of floating capacitors and dc-link capacitors. First, the natural voltage-balancing ability under steady-state and ideal conditions is theoretically proved. However, there are accumulated errors and deviations of capacitor voltages in practical applications, especially under dynamic conditions. In order to address the accumulated errors and deviations of capacitor voltages, the dynamic models of floating-capacitor voltages and neutral-point voltage are established. Moreover, the ACVB method based on the dynamic model of the neutral-point voltage is proposed by injecting the zero-sequence voltage. And the ACVB method based on the dynamic model of floating-capacitor voltages is proposed by introducing the adjustment variables. The proposed ACVB methods have the advantages of simple formula, definite physical meaning, and high accuracy. Furthermore, the output voltage quality and current quality are evaluated in term of total harmonic distortion and the effect of model parameter mismatch on the proposed ACVB methods is presented. Finally, the comparative simulation and experimental results verify the correctness of the proposed ACVB methods based on the dynamic model under different conditions.
22 September 2020 in IEEE Transactions on Power Electronics
In this paper, a novel control method is proposed to control capacitor voltages for a T-type five level nested neutral point piloted (5L-NNPP) converter. Due to the diversity of switching states for NNPP topology, there is no guarantee that the redundant vectors have the opposite impact on DC bus neutral voltage. Meanwhile, the voltage balance control between DC bus neutral voltage and three-phase flying-capacitor voltage is coupled and interacted with each other in 5L-NNPP converter. It has severe voltage balance problems with the conventional space vector modulation (SVM), which limits its wide applications, especially under low output frequency. In order to solve this voltage balance problems, an improved SVM and voltage balance control (VBC) function are proposed to balance DC bus capacitor voltages and flying-capacitor voltages, which realizes de-coupling of voltage control. The switching states, switching principle, and dwell time calculation are developed, and the flowchart of VBC function is also elaborated in detail. The performance of the proposed algorithm with improved SVM are investigated and compared with conventional SVM. The effectiveness and validity of improved SVM with VBC function is verified by simulation and experimental results of the 5L-NNPP converter.