16 December 2024 in IEEE Transactions on Transportation Electrification
This article addresses the fuzzy adaptive fault-tolerant path following control (PFC) problem of unmanned surface vessels (USV) with side-slip compensation, unmeasurable states, and actuator fault. The indirect control strategy is adopted to decompose the PFC into a guidance system and a heading control system. For the guidance system, an adaptive line-of-sight (ALOS) guidance with a time-varying lookahead distance, which yields the desired heading by side-slip estimation and compensation, is designed, thus transforming the PFC problem into the heading tracking control problem. Meanwhile, for the heading control system, a fuzzy state observer is first developed to estimate the unmeasurable states. Next, an adaptive scheme is designed to estimate the time-varying actuator fault and an adaptive fault-tolerant controller is designed by combining the state and fault estimation to enhance the fault-tolerance of PFC system and ensure the performance of path tracking control. Then, the observer and controller are designed integrally, and the stability is analyzed using the integrated design principle. Finally, the simulation case study and comparison experiments of PFC for USV are conducted to demonstrate the performance of this method.
10 July 2025 in IEEE Transactions on Transportation Electrification
Wing-sail-assisted electric propulsion systems are susceptible to intermittent wind factors, which can affect the ship stability. This study proposes a wind condition adaptive constant speed mode. By comparing it with the conventional constant power mode, the control effectiveness and energy-saving potential are evaluated. To mitigate the impact of wind energy on the power grid, a real-time wavelet-equivalent consumption minimization strategy (ECMS) energy management strategy (EMS) is designed based on a hierarchical architecture. This approach aims to improve the energy quality, economic efficiency, and real-time performance under the constant speed mode. Taking a small-scale experimental platform as a prototype and matching it with the target ship through scaling theory, a model of the micro wing-sail-assisted electric propulsion system is established using MATLAB/Simulink. The hardware-in-the-loop verification of the strategy is implemented based on the dSPACE. The results show that the proposed constant speed mode can respond quickly to changes in ship speed and can save 9.66% of fuel consumption compared to the conventional constant power mode, demonstrating better overall performance. Compared with extended Kalman filter (EKF)-model predictive control (MPC) strategy, the real-time wavelet-ECMS strategy under the constant speed mode can suppress 2.45% of voltage fluctuations and reduce fuel consumption by 2.27%. This strategy can provide reference for the greenization of ships with abundant wind resources.