A novel acidic phosphorus extractant (NAPE) was utilized to directly extract yttrium from highly acidic sulfate leach solutions derived from phosphate rock resources. The results indicated that the application acidity of NAPE exceeded those of the commonly used phosphate esters (P204, P507 and Cyanex272), and could directly extract yttrium from the strong acidic sulphate leach solutions (pH = 0.33). In batch experiments, 100% of yttrium was extracted from sulfuric solutions with a pH of 0.33 containing 0.203 g/L of yttrium, using a five-stage counter-current extraction process. The organic system consisted of 10% (v/v) NAPE and 5% (v/v) TBP in sulfonated kerosene, with an A/O ratio of 2:1, conducted at a laboratory temperature of 27±1°C over 10 minutes. Additionally, the extraction of other metals (aluminum, magnesium, manganese, and calcium) was minimal, with the exception of iron. Subsequently, 97.7% of the yttrium in the loaded organic phase was selectively stripped using a 1 mol/L H2SO4 solution, followed by a 1 mol/L H2C2O4 solution to strip the co-extracted iron for recycling purposes. Throughout the entire process, 97.7% of yttrium was recovered and concentrated in the strip liquor to a concentration of 1.5863 g/L. The yttrium in the strip liquor was easily recovered through sodium oxalate precipitation. After roasting, a yttrium oxide product was obtained with impurity elements such as Fe, Al, Mn, Mg, Ca, and P content less than 0.02%.