18 June 2024 in IEEE Transactions on Vehicular Technology
Understanding fundamental limits of the antiinterference performance of direct sequence spread spectrum (DSSS) systems is essential for efficient state-of-the-art antiinterference implementation. Existing research contributions on anti-interference implementation mainly aims at blocking interference and DSSS with long period sequences (LPS-DSSS). However, broadband interference, due to high energy efficiency, is a more effective interference mode to DSSS systems. Conventional bit error rate (BER) models bring errors during the despreading process in DSSS with short period sequences (SPS-DSSS). Therefore, in this paper, we focus on the BER performance of SPS-DSSS systems. More particularly, we propose the maximum matching decision criteria (MMDC) based statistical BER model that is capable of accurately evaluating the BER performance for both LPS and SPS systems. Firstly, explicit mathematical model of the despreading of MSK signals in DSSS systems is established; Then, mathematical models of despreading under typical interference modes, i.e., multi-tone and pseudo-random noise (PN) code MSK interference, are derived. Finally, statistical BER model is proposed using the MMDC scheme to evaluate the BER performance. Extensive simulation and experimental results reveal that: 1) the proposed statistic BER model outperforms conventional BER model for SPS-DSSS systems, and is consistence with that for LPS-DSSS; 2) for MSK DSSS systems, PN code MSK interference outperforms multi-tone interference in the BER performance; 3) practical tests demonstrate that the same PN code length interference is capable of obtaining higher BER performance than different PN code lengths interference, due to the strong correlation between the interference signal and the desired signal in DSSS systems.
11 August 2023 in IEEE Transactions on Vehicular Technology
Interference cancellation holds great promising to suppress the non-cooperative interference. However, it is usually difficult to obtain an ideal copy of the non-cooperative interference since its statistical characteristics are unknown. A novel adaptive antenna array based non-cooperative co-channel interference cancellation system for ultrashort wave (USW) radios is proposed in this paper. By adopting the auxiliary antenna array, the designed system realizes blind interference extraction from the received mixed signal based on the constrained maximum variance criterion. Then, the extracted interference is assigned as the reference signal to realize interference cancellation of the received signal in the reference antenna channel. Meanwhile, the non-ideality characteristics including nonlinearity and IQ imbalance in the receiver chain are taken into account. A widely linear least mean square (WLLMS) model based on Volterra series is introduced in the cancellation process. As a blind method, no extra reference signal and specified array structure are required in this proposed system. Simulation and experimental results validate the effectiveness of the proposed scheme, which implies comparatively strong practicality in non-cooperative co-channel interference cancellation for USW radios in engineering.
23 September 2025 in IEEE Transactions on Vehicular Technology
Main-lobe jamming (MLJ) suppression presents a formidable challenge in morden satellite communication (SATCOM). In scenarios where the directions of arrival (DOAs) of the MLJ signal and the signal of interest (SOI) are either similar or identical, the commonly used spatial filtering techniques prove ineffective in suppressing MLJ signal while preserving the SOI. Given that the SOI is cooperative, we leverage cognitive prior feature information of the SOI to enhance its distinctiveness from the MLJ signal. Based on this, we propose a feature-aided MLJ suppression method using hopping coding (HC) modulation. By carefully designing a coded transmitted signal, we equivalently implement hopping in the spatial channel of the SOI. Subsequently, after reconstructing the received signal into the space-code joint domain, the MLJ suppression problem can be efficiently addressed using typical spatial filtering methods in higher dimensions. The mathematical principles behind the proposed method are first investigated to solve the MLJ suppression issue. Then a detailed feature-aided MLJ cancellation method is discussed. Theoretical analysis, along with numerical results obtained from simulations and experiments, are presented to validate that the proposed method surmounts the limitations of traditional spatial MLJ suppression methods. It successfully suppresses the jamming signal, particularly the self-protecting (SP) MLJ signal, while receiving the SOI with negligible attenuation.
9 June 2020 in Applied Intelligence
18 December 2023 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
The remote sensing satellite is developing toward high resolution, large data capacity, and fast transmission rate. The ground receiver is correspondingly required to have the high parallel to improve real-time reception and processing capabilities. In the frequency domain, the parallel processing of multiple subbands is achieved by dividing broadband into narrow bands. However, narrow-band subbands are reconstructed into broadband signals, which can lead to cross-subband distortion. It will affect the accuracy of high-resolution remote sensing images. In this article, the subband division and reconstruction framework is proposed by combining the analog filter with the digital filter. The phase calibration methods and digital filter optimization are proposed to improve the amplitude and phase consistency of the reconstructed signal. The simulation results show that the proposed amplitude consistency optimization method effectively reduces the reconstruction error within 0.001 dB. The proposed phase calibration method effectively reduces the bit error rate of the reconstructed signal. The maximum deviation is no more than 0.1%. Experiments have shown that the optimization method can reduce the distortion error of high-resolution remote sensing images.