5 January 2023 in International Journal of Thermal Sciences
1 November 2022 in Physics of Fluids
The behavior of aluminum droplets impacting a wall critically affects the operation of solid rocket motors. In the present study, the flow and rebound of aluminum droplets with high surface tension are studied experimentally and numerically. In addition, the impact at different inclined angles of aluminum droplets on a wall is monitored experimentally. The impact angle has no clear effect on the relaxation time and the maximum spreading diameter of the droplet. When the droplet is about to rebound away from the wall, it is stretched to its maximum length. An empirical correlation formula is proposed to predict the maximum length when a droplet is about to bounce off a flat plane. The velocity and pressure distributions of a droplet flowing over a flat plane and an inclined plane are compared by using the volume of fluid method. Furthermore, the restitution coefficient of the droplet is discussed in detail. When Wen ranges from 0 to 20, en ranges from 0.3 to 0.6. When 10 < Wet < 80, et is maintained at 0.75. The formulas for the total restitution coefficient, normal restitution coefficient, and tangential restitution coefficient of aluminum droplets are also presented. Based on the principle of conservation of energy, we calculate the energy loss of aluminum droplets impinging on a wall and give the relationship between the restitution coefficient and the dissipated energy. The results elucidate the mechanisms at work when aluminum droplets collide with a wall.
13 January 2023 in Aerospace Science and Technology
13 June 2022 in Acta Astronautica
16 November 2022 in Acta Astronautica
1 November 2024 in Physics of Fluids
During the operation of solid rocket motors, the behavior of condensed particles impacting the wall will have a remarkable influence on the structure and performance of the engine. Especially when the aircraft is under overload flight conditions, the condensed particles will form a local high concentration particle flow under the action of inertia force, continuously scouring the surface of the insulation layer, seriously affecting the thermal protection structure and the work safety of the engine. Therefore, it is an essential issue to master the behavior mode of the condensate particle impinging the wall and clarify its dynamic characteristics and evolutionary mechanism. In this paper, the dynamic behavior of aluminum droplets impacting on the porous surface is experimentally investigated by preparing the porous wall, the influence mechanism of the porous structure on the spreading process of aluminum droplets is clarified, and the effects of the droplet's initial parameters as well as surface environment are analyzed. Combined with the fluid of volume method, the flow process of droplets on the porous surface is simulated. With the variation of the dimensionless parameters M and N, the main behavior patterns of the droplets obtained so far are rebound, adhesion, partial rebound, partial adhesion, and porous seepage. The presence of pore structure enhances the hydrophobicity of the wall and makes the droplets more easily broken during spreading. When the droplet initial energy is certain and the wall structure conditions change, there is a strong competitive relationship between its spreading and penetration. When the droplet initial energy is increased, its spreading and penetration strengths are significantly increased. The research results can provide a reference for the erosion process of condensed-phase droplets impinging on the char layer and provide theoretical basis and data support for the design and optimization of SRMs.