20 January 2012 in Physical Review Letters
At the impact of a liquid droplet on a smooth surface heated above the liquid's boiling point, the droplet either immediately boils when it contacts the surface (``contact boiling''), or without any surface contact forms a Leidenfrost vapor layer towards the hot surface and bounces back (``gentle film boiling''), or both forms the Leidenfrost layer and ejects tiny droplets upward (``spraying film boiling''). We experimentally determine conditions under which impact behaviors in each regime can be realized. We show that the dimensionless maximum spreading $\gamma${} of impacting droplets on the heated surfaces in both gentle and spraying film boiling regimes shows a universal scaling with the Weber number We ($\gamma${}$\sim${}We2/5), which is much steeper than for the impact on nonheated (hydrophilic or hydrophobic) surfaces ($\gamma${}$\sim${}We1/4). We also interferometrically measure the vapor thickness under the droplet.
8 February 2013 in Soft Matter
When a droplet impacts upon a surface heated above the liquid's boiling point, the droplet either comes into contact with the surface and boils immediately (contact boiling), or is supported by a developing vapor layer and bounces back (film boiling, or Leidenfrost state). We study the transition between these characteristic behaviors and how it is affected by parameters such as impact velocity, surface temperature, and controlled roughness (i.e., micro-structures fabricated on silicon surfaces). In the film boiling regime, we show that the residence time of droplets impacting upon the surface strongly depends on the drop size. We also show that the maximum spreading factor Γ of droplets in this regime displays a universal scaling behavior Γ ∼ We3/10, which can be explained by taking into account the drag force of the vapor flow under the drop. This argument also leads to predictions for the scaling of film thickness and velocity of the vapor shooting out of the gap between the drop and the surface. In the contact boiling regime, we show that the structured surfaces induce the formation of vertical liquid jets during the spreading stage of impacting droplets.
3 January 2017 in Annual Review of Fluid Mechanics
This article reviews the fundamental physics of vapor bubbles in liquids. Work on bubble growth and condensation for stationary and translating bubbles is summarized and the differences with bubbles containing a permanent gas stressed. In particular, it is shown that the natural frequency of a vapor bubble is proportional not to the inverse radius, as for a gas bubble, but to the inverse radius raised to the power 2/3. Permanent gas dissolved in the liquid diffuses into the bubble with strong effects on its dynamics. The effects of the diffusion of heat and mass on the propagation of pressure waves in a vaporous bubbly liquid are discussed. Other topics briefly touched on include thermocapillary flow, plasmonic nanobubbles, and vapor bubbles in an immiscible liquid.
1 April 2007 in Physics of Fluids
A type of superhydrophobic surface consists of a solid plane boundary with an array of grooves which, due to the effect of surface tension, prevent a complete wetting of the wall. The effect is greatest when the grooves are aligned with the flow. The pressure difference between the liquid and the gas in the grooves causes a curvature of the liquid surface resisted by surface tension. The effects of this surface deformation are studied in this paper. The corrections to the effective slip length produced by the curvature are analyzed theoretically and a comparison with available data and related mathematical models is presented.
1 October 2009 in Physics of Fluids
The acoustic nucleation threshold for bubbles trapped in cavities has theoretically been predicted within the crevice theory by Atchley and Prosperetti [“The crevice model of bubble nucleation,” J. Acoust. Soc. Am. 86, 1065 (1989)]. Here, we determine this threshold experimentally, by applying a single pressure pulse to bubbles trapped in cylindrical nanoscopic pits (“artificial crevices”) with radii down to 50 nm. By decreasing the minimum pressure stepwise, we observe the threshold for which the bubbles start to nucleate. The experimental results are quantitatively in good agreement with the theoretical predictions of Atchley and Prosperetti. In addition, we provide the mechanism which explains the deactivation of cavitation nuclei: gas diffusion together with an aspherical bubble collapse. Finally, we present superhydrophobic nuclei which cannot be deactivated, unless with a high-speed liquid jet directed into the pit.
21 April 2006 in Physical Review Letters
Self-similarity has been the paradigmatic picture for the pinch-off of a drop. Here we will show through high-speed imaging and boundary integral simulations that the inverse problem, the pinch-off of an air bubble in water, is not self-similar in a strict sense: A disk is quickly pulled through a water surface, leading to a giant, cylindrical void which after collapse creates an upward and a downward jet. Only in the limiting case of large Froude numbers does the purely inertial scaling for the neck radius [J. M. Gordillo et al., Phys. Rev. Lett. 95, 194501 (2005)] become visible. For any finite Froude number the collapse is slower, and a second length scale, the curvature of the void, comes into play. Both length scales are found to exhibit power-law scaling in time, but with different exponents depending on the Froude number, signaling the nonuniversality of the bubble pinch-off.