10 April 2024 in IEEE Transactions on Power Electronics
In this article, a variable structure sliding mode observer (VS-SMO) for load torque observation is designed by adding a decoupling term to the structure of the traditional sliding mode observer. The VS-SMO can remove the coupling relationship between the parameter to be estimated and the derivative of the estimated speed error, as well as the chattering signal in the estimated load torque. Then, a variable structure extended sliding mode observer (VS-ESMO) is designed on this basis, with the moment of inertia used as an extension, to achieve simultaneous identification of the load torque and the moment of inertia. This article analyzes the estimation errors and the impact of measurement noise on estimation errors. The stability of the VS-ESMO is proved by backstepping control theory. An experiment is carried out on a 3.1 kW surface-mounted permanent magnet synchronous motor to validate the identification performance. The experimental results demonstrate that the VS-ESMO has a high estimation accuracy and fast convergence speed, and the identification value does not contain a chattering signal. Using the inertia and load torque identified by VS-ESMO for parameter tuning and compensation can improve system dynamic performance and anti-interference performance to the load.
2 December 2024 in IEEE Transactions on Power Electronics
In this article, based on the idea of disturbance estimation, an extended disturbance observer (EDOB), including speed, load torque, and moment of inertia, is constructed. By deeply analyzing the internal relationship between the three estimation errors in the observer, the identification of the two coupled parameters (load torque and moment of inertia) is simplified to two observation equations expressed by the speed estimation error and independent of each other. The resulting coupling error is suppressed by the designed moment of inertia trigger. The EDOB and trigger cooperate to achieve high-precision identification of load torque and moment of inertia, while also ensuring the identification accuracy of the motor's moment of inertia during steady-state operation, improving the practicality of complex industrial equipment. Finally, an experiment is carried out on a 3.1 kW surface-mounted permanent magnet synchronous motor. The experimental results show the proposed observer has excellent estimation accuracy and robustness. The moment of inertia and load torque identified by the observer are used for proportional integral parameter tuning and feedforward compensation respectively, which can enhance the anti-disturbance ability of the system to the load, reduce the tracking error and improve the system's dynamic performance.
13 August 2025 in IEEE Transactions on Power Electronics
Aiming at the problems of control gain mismatch and disturbance rejection in permanent magnet synchronous motor control system, this article proposes a variable control gain linear active disturbance rejection controller (VG-LADRC) with strong disturbance rejection ability and control gain adaptive function. This controller adopts a cascaded extended state observer. ESO1 is used to jointly estimate the system control gain and external disturbance, and ESO2 further compensates the residual disturbance on this basis, thus realizing hierarchical processing and coordinated suppression of disturbance observation. To enhance the adaptability of the controller to the change of control gain, this article designs a control gain adaptive law based on error feedback and integrates the motor dynamic information to construct an adaptive factor. Thus, the controller can improve the control gain convergence speed through multidimensional state perception and enhance its robustness under complex working conditions. Theoretical analysis shows that the VG-LADRC has excellent disturbance suppression performance in the range of low-frequency to medium–high frequency and exhibits strong robustness to control gain mismatch. Finally, dynamic tests are carried out to verify the control performance and engineering applicability of the proposed method.
27 November 2024 in IEEE Transactions on Energy Conversion
In this paper, a decoupling control method based on improved proportional regulator and enhanced extended state observer (IP-EESO) for interior permanent magnet synchronous motor (IPMSM) used in electric vehicles is proposed. The coupling problem between the two-input and two-output systems is treated as an anti-disturbance problem of the single-input and single-output system, with the coupling term considered as the disturbance quantity for observation. Improvements are made from two aspects: the structure of the extended state observer and model compensation. This achieves complete decoupling of the interior permanent magnet synchronous motor. Compared with the traditional current feedback decoupling control, the proposed decoupling method reduces the current regulation time when inductance parameters do not match. Furthermore, compared to the traditional decoupling method based on the proportional regulator and extended state observer (P-ESO), the proposed decoupling control method achieves complete decoupling even under torque or speed slope changes, with shorter adjustment times during abrupt torque changes. The proposed method is tested on a 60 kW interior permanent magnet synchronous motor, and the results verify its feasibility and effectiveness.