29 May 2019 in IEEE Transactions on Electromagnetic Compatibility
Unmanned aerial vehicle (UAV) is likely to be interfered by high-power microwave (HPM) pulse, especially its datalink. To investigate the effects of HPM pulse on the datalink of a UAV in a dynamic flight scenario, a tracking interference model for an HPM source toward a UAV is proposed, as well a dynamic flight model is also built to determine the HPM reception of the UAV's datalink. In order to predict the possible effects of HPM on the datalink, the tests on a certain type of UAV's datalink are carried out in the presence of HPM with its carrier frequency in L-, S- and C-band, respectively. The results show that the electromagnetic interference (EMI) can easily enter the receiver via front-door when the carrier frequency of the HPM falls into the operating frequency band of the datalink, which will lead to a permanent physical damage. However, when the carrier frequency deviates from the operating frequency band of the datalink, the EMI couples into the incomplete shielded power line via back-door and generates a high-voltage signal at the power port, resulting in a transient lost-link effect or even a functional failure of the datalink due to its abnormal electric power supply. Finally, some suggestions are put forward to improve the UAV's adaptability in the HPM environment.
13 September 2018 in IEEE Transactions on Electromagnetic Compatibility
The operation signal of an unmanned aerial vehicle's (UAV's) datalink will change with the flight radius and attitude, which leads to a dynamic variation of the electromagnetic susceptibility (EMS) of the datalink against the external electromagnetic interference. In order to predict the electromagnetic compatibility (EMC) for the dynamic datalink of a UAV, the operation signal of the UAV's datalink and the received interference by the UAV need to be quantified and the EMS is also necessary to be tested. In this paper, a new model of the UAV's datalink in different flight states is presented. The relationship among the airborne operation signal, the interference and the flight parameters is presented and compared in three typical flight states, i.e., the fixed angle state, dive state, and hover state. To increase the repeatability and accuracy of the test and avoid risks in a flight test, a novel EMS test method using a static test instead of a dynamic flight test is proposed. On the basis of the operation state and its corresponding EMS threshold, the EMC prediction is performed to determine the moment when the datalink will be interrupted. The new method can be used to improve the security of UAV in the severe electromagnetic environment.