Transition of PEM fuel cells to the commercial market requires low-cost components, materials and manufacturing processes. Considering that bipolar plate manufacturing currently contributes to a significant percentage of the total fuel cell manufacturing cost, an inexpensive bipolar plate manufacturing process must be realized for fuel cells to achieve prominence in the commercial energy sector. A through-mask electro-etching process for high volume manufacturing of stainless steel bipolar plate gas flow field channels is being developed using pulse and pulse reverse electric fields. It has been demonstrated that the process can achieve a uniform channel depth, exhibits good repeatability for multiple experiments performed under the same conditions and the undercut beneath the photoresist mask varies linearly with channel depth indicating that pattern design compensation prior to photoresist patterning of the substrate to achieve the dimensional accuracy of the gas flow field channels and ribs is possible.
The global trend to eliminate lead from electronic devices is driven by legislative and marketing pressures based on environmental, health and social concerns on the cumulative effects of lead in waste streams. Tin and tin-rich alloys are the forerunning replacements for tin-lead solders. However, pure tin electrodeposits have a tendency to form tin whiskers that may cause short-circuiting, metal vapor arcing and failure of the component. The major cause of whisker growth is thought to be compressive stress in pure tin deposits after DC plating. Faraday Technology, Inc. has developed an electrically mediated electrochemical process for depositing lead-free solders, based on non-steady state electric fields to control the deposition process and consequently the physical properties of the deposit. Results of electrically mediated tin deposits are presented and compared to DC deposits in terms of grain size, internal stress type/magnitude and surface roughness.
18 September 2017 in The Electrochemical Society Interface
This installment of the semi-regular column on patent law looks at what can constitute a patentable invention and what are the conditions for receiving a patent or claim. From an electrochemical perspective there are five statutory classes of patentable inventions such as a process or method for an electrodeposition, electrochemical surface finishing or electrosynthesis process; a machine or apparatus such as an electrolytic cell; a manufacture or product using an electrochemical process; a composition of matter or chemical compound or alloy such as a battery electrode material; or an improvement of said process, machine, manufacture, or composition of matter. Attention is given to the definition of a “person having ordinary skill in the art” (PHOSITA). 32 references.
This paper will discuss progress in development by Faraday of an integrated technology to recover and recycle metals from electrochemical machining (ECM). ECM is suited for low mass removal, high value-added manufacturing steps that cannot be easily performed using conventional machining, whether due to workpiece material properties, tooling limitations, or high surface integrity requirements. Sludge byproducts formed during conventional ECM processes are difficult to recover from the electrolyte, and discarding the sludge results in the loss of potentially valuable “waste” metal as well as entrained electrolyte salts and water. Results will be presented demonstrating a “Recycling ECM” technology, which is based upon patented cell designs and pulsed waveforms, targeting alloys including: C18000 copper, SAE4150 alloy steel, 316L stainless steel, and INCONEL® 718. These metals were machined in electrolyte to concentrations between 800-3500 ppm and subsequently recovered by electrowinning in solid, metallic form devoid of hydroxides/hydrated oxides, without intermediate electrolyte processing.