Fired brick is a universal building material, produced by thousand-year-old technology, that throughout history has seldom served any other purpose. Here, we develop a scalable, cost-effective and versatile chemical synthesis using a fired brick to control oxidative radical polymerization and deposition of a nanofibrillar coating of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT). A fired brick’s open microstructure, mechanical robustness and ~8 wt% α-Fe2O3 content afford an ideal substrate for developing electrochemical PEDOT electrodes and stationary supercapacitors that readily stack into modules. Five-minute epoxy serves as a waterproof case enabling the operation of our supercapacitors while submerged underwater and a gel electrolyte extends cycling stability to 10,000 cycles with ~90% capacitance retention.
A low-temperature modified vapour-phase synthesis allows for the deposition of high aspect ratio, conductive and capacitive one-dimensional nanostructures of the conducting polymer polypyrrole onto three-dimensional fibrous substrates. Nanofibrillar polypyrrole resembling nanobrushes can be deposited at temperatures as low as 50 °C without the use of hard templates. When deposited on a conductive substrate such as hard carbon paper, the nanofibers exhibit a three-electrode specific capacitance of 144.7 F g−1 over a 1.2 V window in 1 M lithium perchlorate with good reversibility. Two electrode electrochemical capacitors fabricated using polypyrrole on hard carbon paper exhibit a specific energy ranging from 7 to 13 W h kg−1 based on average electrode active mass with a maximum charging voltage between 0.6 and 1 V. Furthermore, the devices can undergo 200 000 cycles while retaining 70% of their initial capacitance when charged to 0.6 V. This work represents a significant advance in the synthesis of nanostructured polypyrrole from the vapor phase.
13 September 2016 in The Journal of Physical Chemistry Letters