The Internet of things (IoT) is transforming the whole of society. It represents the next evolution of the Internet and will significantly improve the ability to gather and analyze data, as well as the ability to control devices remotely. In this respect, the usage of connected devices is continuously growing with the expansion of the applications being offered to individuals and industries. To address IoT market needs, many low-power wide-area (LPWA) technologies have been developed, some operating on licensed frequencies (e.g., narrowband-IoT NB-IoT and Long-Term Evolution-M LTE-M), and others on unlicensed frequencies (e.g., LoRa, Sigfox, etc.). In this paper, we address the Release 13 of the NB-IoT 3rd generation partnership project (3GPP) standardized LPWA technology and provide a tutorial on its physical layer (PHY) design. Specifically, we focus on the characteristics and the scheduling of downlink and uplink physical channels at the NB-IoT base station side and the user equipment (UE) side. The goal is to help readers easily understand the NB-IoT system without having to read all the 3GPP specifications or the state-of-the-art papers that generally describe the system. To this end, each presented concept is followed by examples and concrete use-cases to further aid in the reader’s comprehension. Finally, we briefly describe and highlight the new features added to the NB-IoT system in Releases 14 and 15.
Linear minimum mean square error (LMMSE) is by definition the optimal channel estimator in the sense of mean square error criterion, but its practical application is limited by its high complexity. Furthermore, the LMMSE estimation method requires the knowledge of both the channel and the noise statistics, which are a priori unknown at the receiver. A wide range of techniques are proposed in the literature in order to overcome these two drawbacks. In this study, the authors give an overview of the LMMSE‐based channel estimation in an orthogonal frequency division multiplexing (OFDM) context. A didactic reminder concerning the basics of LMMSE estimation and its performance is provided, and a survey of techniques of the literature, which enable the practical application of LMMSE and the reduction of its complexity, is presented in both single‐input single‐output and multiple‐input multiple‐output contexts. Finally, some perspectives are provided, in particular the application of the LMMSE estimator to flexible waveforms beyond OFDM.
2 July 2024 in IEEE Transactions on Communications
This paper deals with discrete Fourier transform (DFT)-based modulation and demodulation techniques for affine frequency division multiplexing (AFDM), as opposed to using the discrete affine Fourier transform (DAFT). This allows for a simple (de)modulation process based on the usual DFT, enabling the interpretation of AFDM as a precoded orthogonal frequency division multiplexing (OFDM) waveform. This makes the AFDM modulation scheme backward compatible with existing OFDM systems. Furthermore, the sampling frequency of the modulated AFDM signal can be finely tuned using the suggested methods, whereas the usual DAFT leads to signals sampled at the Nyquist rate. To achieve this, a DFT-based AFDM modulation technique is introduced, along with a corresponding demodulation method. The introduction considers necessary conditions on the AFDM signal parameters, albeit at the cost of reduced flexibility in parameter settings, as only a limited set of parameters can be considered. The validity of the presented method is supported by mathematical developments and proofs, and validated through simulations. Furthermore, a complexity analysis is conducted.
1 January 2026 in IEEE Communications Standards Magazine
Affine frequency division multiplexing (AFDM) is an emerging waveform candidate for future sixth-generation (6G) systems offering a range of promising features, such as enhanced robustness in heterogeneous and high-mobility environments, as well as inherent suitability for integrated sensing and communications (ISAC) applications. In addition, unlike other candidates such as orthogonal time-frequency space (OTFS) modulation, AFDM provides several unique advantages that strengthen its relevance to practical deployment and standardization in 6G. Notably, as a natural generalization of orthogonal frequency division multiplexing (OFDM), strong backward compatibility with existing conventional systems is guaranteed, while also offering novel possibilities in waveform design, for example to enable physical-layer security through its inherent chirp parametrization. In all, this article provides an overview of AFDM, emphasizing its suitability as a candidate waveform for 6G standardization. First, we provide a concise introduction to the fundamental properties and unique characteristics of AFDM, followed by highlights of its advantageous features, and finally a discussion of its potential and challenges in 6G standardization efforts and representative requirements.
4 September 2015 in IEEE Transactions on Communications
This paper deals with the minimum mean square error (MMSE)-based multipath channel and noise variance estimation in the case of a pilot-aided orthogonal frequency division multiplexing/offset quadrature amplitude modulation (OFDM/OQAM) system. The theoretical expression of the LMMSE channel estimation is formulated and a simpler closed-form is derived. The MSE analysis shows that LMMSE inevitably reaches an error floor due to the interference inherent to OFDM/OQAM modulation. Furthermore, an algorithm for the joint MMSE estimation of both the channel and the noise variance (J-MCNE) is proposed and features a reduced complexity thanks to the low-rank approximation method. The noise level estimation represents a challenge as it is concealed in the intrinsic interferences generated by the OFDM/OQAM. Simulations reveal the capability of the proposed J-MCNE method to estimate the noise variance and show that the achieved bit error rate (BER) is close to that of the perfect estimation.
12 July 2013 in EURASIP Journal on Advances in Signal Processing