1 February 2007 in Food Science and Technology International
Open sun drying experiments in thin layers of crain-crain (CC), fever (FV) and bitter (BT) leaves grown in Abeokuta, Nigeria were conducted. The drying process took place in the falling rate period and no constant rate period was observed from the drying curves. Eight thin layer mathematical drying models were compared using the multiple determination coefficients (R2), reduced chi-square (χ2) and root mean square error (RMSE) between the observed and predicted moisture ratios. Accordingly, Midilli et al. model satisfactorily described the drying curves of the three leaves with R2 of 0.9980, χ2 of 2.0×10-4 and RMSE of 1.09×10-2 for CC leaves; R2 of 0.9999, χ2 of 2×10-6 and RMSE of 1.11×10-3 for FV leaves; and R2 of 0.9998, χ2 of 1.9×10-5 and RMSE of 3.3×10-3 for BT leaves. The effective diffusivity was found to be 52.91×10-10, 48.72×10-10 and 43.42×10-10 m2/s for CC, BT and FV leaves, respectively.
12 December 2007 in International Journal of Food Science and Technology
1 December 2002 in Biosystems Engineering
23 November 2007 in Nigerian Food Journal
Modeling drying kinetics of fever leaves ( Ocimum viride ) in a convective hot air dryer
5 January 2022 in Mechanical Engineering for Society and Industry
This research investigated the role of silica on palm kernel shell (PKS) as friction lining materials in automotive brake pad production. The friction materials were crushed, milled and sieved into four different particle sizes of 100, 150, 200 and 350 µm. The formulations weight percentages employed included Resin (20%), steel slag (15%) and carbon black (5%) while palm kernel shell and silica were varied for each particle size. Individual formulation was mixed for about 10 minutes until formation of homogeneous mixture. Homogeneous formulation A, B, C and D respectively, was compacted into mould and later sintered at 150 oC for 10 minutes in electric furnace and subsequently treated to enhance quality. Produced samples were characterized and evaluated for surface hardness (SH), compressive strength (CS), flame resistance (FR), oil absorption (OA), water absorption (WA) and wear rate (WR). The particles were also characterized using Scanning Electron Microscope. The results revealed that sample D had highest SH and CS values of 105.5 Brinell hardness number (BHN) and 115.2 N/mm2 respectively with decreasing values as particle size increases. FR decreased from samples A to D, and also decreased as particle size increased. Deductively, Sample B with the sieved grade of 100 µm was the best with SH as 99.14 BHN, CS as 105.6 N/mm2, WR as 4.15%, FR as 38.98%, and WA rate as 4.26 % and CF as 0.45 and OA rate as 0.381%. Conclusively, this research developed a high quality eco-friendly PKS particle composite for the production of brake pad.
1 June 1994 in Journal of Agricultural Engineering Research