19 June 2025 in International Journal of Impact Engineering
8 November 2023 in Advanced Engineering Materials
This article deals with the dynamic penetration of 3D‐printed panels with auxetic and conventional honeycomb unit cell‐based cores. The geometry of the unit cells and their periodic assembly in the resulting lattices are selected to ensure the same relative density and overall weight of the individual sample types. Such a similarity of both specimen types allows for the evaluation of differences between conventional and auxetic lattices in terms of penetration characteristics and deformation energy mitigation properties. Dynamic penetration of the samples is performed using a fully strain‐gauge instrumented open Hopkinson pressure bar at three impact velocities resulting in three loading scenarios. All the performed experiments are captured by two optical cameras for detailed observation and to track the impactor movement using digital image correlation. The force‐penetration depth relation is used to evaluate the elastic and postyield compression characteristics of the lattices together with their deformation energy mitigation capabilities. The results show that the main differences in the deformation response of the lattices consist of lower overall stiffness and effective yielding of the auxetic lattices at a higher penetration depth. Numerical simulation using an explicit solver is performed to analyze the deformation mechanism of the individual core types.
10 April 2026 in Measurement
28 September 2026 in Emergent Materials
Auxetic lattices are an important part in the development of smart metamaterials suitable for intelligent applications in high strain-rate dynamics. In this work, three types of auxetic lattices (missing-rib, two- and three-dimensional re-entrant honeycomb) additively manufactured from 316L stainless steel using the LPBF method were subjected to a combined experimental and numerical investigation of their compressive response under quasi-static conditions and during dynamic impact at nominal strain rates of $$1500{\text {s}^{-1}}$$ and $$3000{\text {s}^{-1}}$$ in an in-house designed SHPB apparatus. All the experiments were instrumented using optical cameras for non-contact deformation tracking to establish deformation fields in the samples and calculate the strain and strain-rate dependent function of Poisson’s ratio. A fully 3D three-bar finite element model of the SHPB apparatus and the studied lattices was developed and implemented in LS-DYNA. Mesh density and discretization type sensitivity studies were carried out together with the experimental calibration of strain-rate dependent bilinear constitutive model representing the material of the 3D printed lattices. Simulated dynamic impacts were performed with the same initial conditions as the experiments and the numerical stress-strain characteristics of the studied samples were calculated from the numerical strain signals using the same mathematical methods used for evaluation of laboratory SHPB experiments. The agreement of the experimental and simulated stress-strain response up to the densification region was studied for all the investigated types of lattices at both dynamic strain rates. To interpret the origin of the discrepancies in the simulated and observed stress-strain response as well as the calculated function of Poisson’s ratio, X-ray computed microtomographical imaging was performed and the assessed differences were attributed to the manufacturing inaccuracies and defects in the samples.