In this study the cutting tool temperature that develops during rough turning of hardened cold-work tool steel is modelled on the basis of experimental data. The data obtained from a series of thermocouples, placed on a PCBN insert, into an anvil, and into a toolholder, were used as the input for the model. An inverse problem was solved, where the heat fluxes and heat transfer coefficients were computed and where the developed temperature field was reconstructed from the experimental readings. The temperature was modelled for the case of new tools, as well as for the case of its development in the course of tool wear. The machining case involved utilization of a high-cBN content and a binderless PCBN grade, both possessing high thermal conductivity of 110 and 190W/mK respectively
The multifractal analysis (MFA) of the spatial microform area formed on the surface of steel C35 and aluminum alloy AA2024 at the face milling was implemented. The input information for the MFA was micro-images of the machined workpiece surface. Multifractal (MF) spectra and their main parameters are calculated for the surface of samples machined at various cutting conditions. Renyi’s numbers and fractal ordering parameters were chosen as the most informative MF parameters describing the surface structure. It is shown that the MF functions of the system correspond to their canonical forms. Quantitative relationships between the parameters of MF spectra for the surface area of microforms formed during machining surfaces of steel and aluminum alloy workpieces and the cutting conditions were obtained. The physical processes that are responsible for the formation of the observed MF spectra on the surface of the workpieces depending on feed and depth of cut at the face milling were discussed. The developed computational technique can be used to describe and analyze the state of spatial fractal structures formed on the surface of other materials.